Cobra Electronics LI 6500WX Auto Squelch/Maximum Range, Lock Feature, Signal Strength Meter

Page 6
Speaker/Microphone/Charge Jack
YourmicroTALK radio canbe fittedwith an externalSpeaker/Microphone, freeing your hands for other tasks. This samejack also serves as the
connecting point for the wall charger/adapter.
Speaker/Microphone/
Charge Jack To attach a speaker/microphone:
1. Open the speaker/microphone/charge
tab on top of your microTALK radio.

Using Your Radio

Operation

Auto Squelch/Maximum Range

Your microTALK radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise due to terrain and conditions. This slightly reduces the Maximum Range at which signals can be heard.

You can turn off auto squelch to allow all signals to be received and extend the maximum range of your radio.

Light/Max Range To briefly turn off auto squelch:

Press the Light/Max Range button for less than five seconds.

If you hear two beeps, you have turned

the maximum range extender on (see below).

To turn maximum range extender on:

Press and hold the Light/Max Range button for at least five seconds until you hear two beeps which indicates the maximum range extender is on.

To turn maximum range extender off:

Press and release the Light/Max Range button or change channels.

Lock Feature

The Lock feature locks the Channel, Mode, Hi•Low and Power buttons to prevent accidental operation.

 

 

 

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Insert the plug into the speaker/ microphone/charge jack.

To connect a wall charger/adapter:

1. Open the speaker/microphone/charge tab on top of your microTALK radio.

2. Insert the wall charger/adapter plug into the speaker/microphone/charge jack.

Signal Strength

 

 

Signal Strength Meter

 

 

Your microTALK radio has a Signal Strength

 

 

 

 

 

Meter that shows the strength of your incoming

 

 

 

and outgoing transmissions. The ascending bars

 

 

 

 

next to the signal strength indicate the strength

 

 

 

of the signal. The greater the number of bars

 

 

 

visible, the stronger the signal. The fewer

 

 

 

number of bars visible, the weaker the signal.

 

microTALK Range

Your range will vary depending on terrain and conditions.

 

Lock/Enter Button

Lock Mode

To turn the lock feature on or off:

Press and hold the Lock/Enter button for two seconds.

A double beep sound is used to confirm your lock on or off request. When in Lock mode, the Lock icon will be displayed.

Maximum Range

In flat, open country your radio will

 

 

operate at maximum range.

 

Buildings and foliage in the path of the

Reduced Range

signal can reduce the range of the radio.

Dense foliage and hilly terrain will

 

 

further reduce the range of the radio.

 

On FRS channels 8 through 14, your radio

 

automatically switches to low power, which

Reduced Range

will limit the range the radio can communicate.

6

7

Image 6
Contents Automated Help Desk Making Life Easier and SaferFor Assistance in the U.S.A Customer Assistance OperatorsLimited One-Year Warranty on Radios & Charger Product Features Warranty and Trademark AcknowledgementFeatures For Products Purchased in the U.S.AReplace battery compartment cover and belt clip Caring for YourmicroTALKRadioEstimated operation time on full charge 12 hours Auto Battery Save Using Your RadioBattery Low For charging microTALK radios in desktop chargerCall Button To alert another person that you are calling To switch from high to medium to low powerListening for a Response To Illuminate DisplayAuto Squelch/Maximum Range Lock FeatureSignal Strength Meter MicroTALK RangePrivacy Codes Mode FunctionsScrolling through Mode Functions Set Ctcss Privacy Codes To select a Ctcss privacy codeSmall numbers flash on the display Through NOAA* All Hazards Radio ChannelsSet DCS Privacy Codes To select a DCS privacy code To listen to All Hazards Radio channelsMemory Locations To turn VOX mode on or offVoice Activated Transmit VOX To set VOX sensitivityTo recall a stored memory channel location Press the Mode button toChoose one of the following DisplayTo de-program a memory location Channel ScanTo scan channels Privacy Code Scan Press the Mode button to proceed to set privacyPress the Channel Up or Channel Down button to Select Channel To scan privacy codesMemory Location Scan To scan memory locationsTo change call settings VibrAlert and Call AlertCall ToneSettings Keystroke TonesRoger Beep ConfirmationTone Safety Information for microTALK Radios General Specifications FCC LicenseGeneral Specifications Normal PositionProduct Service Product Service QuestionsFor Products Purchased in the U.S.A