Using Your Radio
Operation
Introduction
|
|
|
Operation | Customer Assistance | Warranty |
Channel Button
Select Channel
Mode Button
Scan Privacy Codes
If you press the Talk button while scanning and not within ten (10) seconds of receiving a transmission you will transmit on the last channel you transmitted or received on.
If you do not press any button within ten (10) seconds, your radio will automatically resume scanning main channels.
To Scan Privacy Codes:
1.While in Standby Mode, press the Channel Up or Channel Down button to choose the main channel you wish to scan.
2.Press the Mode button until the Scan icon and the privacy code number flashes on the display.
3.Press the Channel Up or Channel Down button and your radio will begin scanning privacy codes within the main channel you selected.
4.The Scan icon will continue to be displayed when Scan is On. Your radio will continue to scan privacy codes and stop an incoming transmission is detected. Your radio will remain on that channel and privacy code for ten (10) seconds. During this time, you can:
a.Press and hold the Talk button to communicate with others. Your radio will remain on that channel and privacy code and return to Standby Mode.
b.Press the Channel Up or Channel Down button to resume scanning privacy codes.
c.Press the Mode button to proceed to other functions.
If you press the Talk button while scanning and not within ten (10) seconds of receiving a transmission you will transmit on the last channel you transmitted or received on.
If you do not press any button within ten (10) seconds, your radio will automatically resume scanning privacy codes.
Mode Button
Call Tone Setting
Channel Button
Mode Button
Roger Beep Off
Channel Button
10 Call Tone Settings
•
You can choose between ten (10) different call tone settings to transmit a unique call alert.
To Change a Call Tone Setting:
1.Press the Mode button until the letter “C” and the current call tone number (1 through
10)is displayed. The current call tone will sound for one (1) second.
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.a. Press the Mode button to enter the new setting and proceed to other functions.
b. Press the Lock button to enter the new setting and return to Standby Mode.
“Roger Beep” Confirmation Tone
Your listener will hear an audible tone when you • release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak. This feature can be turned On or Off.
To Turn “Roger Beep” On or Off:
When turning On your microTALK® radio for the first time, “Roger Beep” will be On.
1.Press the Mode button until the Roger Beep icon flashes. The current On or Off setting is displayed.
2.Press the Channel Up or Channel Down button to select “Roger Beep” On or Off.
3.a. Press the Mode button to enter the new setting and proceed to other functions.
b. Press the Lock button to enter the new setting and return to Standby Mode.
The setting you select will be saved when you turn your radio Off and On again. When the “Roger Beep” is On, the “Roger Beep” icon will be displayed.
10English
Nothing comes close to a Cobra™ 11