Preparation, Installing Transmitter | Panasonic AMX-25 specs

40-1372.fm Page 3 Tuesday, August 10, 1999 3:25 PM

PREPARATION

INSTALLING THE

TRANSMITTER

Connecting to Your Audio Source

You can connect the transmitter to your audio source’s left and right au- dio output jacks or its headphones jack.

Caution: Do not connect the trans- mitter to the audio source’s speaker output. Doing so could damage the transmitter and audio source.

1.Connect one end of the supplied audio patch cord to the transmit- ter’s AUDIO IN jacks (white plug to L and red plug to R).

If you are using your audio source’s stereo headphones jack, connect the white and red plugs at the other end of the patch cord to the white and red phono jacks on the supplied Y-cable.

If your audio source has a 1/8-inch headphones jack, connect the 1/8- inch stereo plug on the other end of the Y-cable directly to the audio source’s 1/8-inch head- phones jack.

Note: If your audio source has a 1/4-inch headphones jack, use the supplied 1/8-to-1/4-inch stereo adapter.

2.If you are using your audio source’s audio output jacks, con- nect the white and red plugs at the other end of the patch cord directly to the audio source’s cor- responding left and right audio jacks (white plug to left and red plug to right).