7.Set BASS on the back of each speaker to ON for a deeper, richer bass sound.
Be sure to turn off the speakers when you are not using them.
If you hear distorted sound, check these things:
•Adjust TUNING on the speakers
•Change the position of the trans- mitter
•Rotate FREQ. ADJUST on the transmitter and then adjust TUN- ING until the interference goes away
•Adjust LEVEL on the transmitter so the indicator at the front of the transmitter occasionally flickers
ADJUSTING THE
FREQUENCY
If you receive interference from other devices, you might be able to reduce it by adjusting the speaker’s operating frequency. Simply rotate FREQ. AD- JUST on the transmitter, then rotate TUNING on each speaker until the au- dio is free from interference.
6
IF YOU HAVE
A PROBLEM
If you cannot get sound once you have connected the system, check these things:
•Make sure you rotate each speaker’s POWER/VOL knob clockwise until it clicks so the speakers are turned on
•Be sure the AC adapters are plugged in and have power
•Be sure the audio source is turned on and tuned to an active frequency
•If you have connected to jacks that are controlled by the audio source’s volume control, be sure the source’s volume control is turned up
•Adjust the speaker’s volume con- trol
•Adjust TUNING on the speakers
•Change the position of the trans- mitter
If you still have a problem with the speaker system, see your local Ra- dioShack store for assistance.