Troubleshooting
If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician.
Problem | Solution |
Nothing appears on | • Check that the power cord and line connection |
the screen. | between the camera and monitor are fixed properly. |
| • Check that you have properly connected VIDEO |
| cable to the camera VIDEO output jack. |
|
|
The image on the | • Is lens stained with dirt? Clean your lens with soft, |
screen is dim. | clean cloth. |
| • Set the monitor to proper condition. |
| • If the camera is exposed to too strong light, change |
| the camera position. |
| • Adjust the lens’ focus properly. |
|
|
The image on the | • Adjust the contrast feature of the monitor. |
screen is dark. | Ω |
| • If you have an intermediate device, set the 75 / |
| properly. (refer to page 13) |
|
|
The camera is not | • Check that you have properly connected the camera |
working properly, and | to an appropriate power source. |
the surface of the |
|
camera is hot. |
|
|
|
MOTION DETECTION | • Have you set ‘MOTION DET.’ menu to OFF? |
function is not active. | • Have you set ‘MD LEVEL’ to too low? |
| • Have you set ‘MD AREA’ properly? |
|
|
COLOR DOME CAMERA 32 User’s Manual
Problem | Solution |
The color of the picture | • Check that you have properly set the ‘WHITE BAL.’ |
is not matched. | menu. (refer to page 21) |
|
|
The image on the screen | • Is the camera facing to direct sunlight or fluoresent |
flickers. | lighting? Change the camera position. |
|
|
L/L mode isn’t able to | • Have you connected your camera to DC power |
be selected. | source? Connect it to AC power source. |
|
|
COLOR DOME CAMERA 33 User’s Manual