Operating Your Camera
SPECIAL
1.Press the SET button to display the setup menu and move the arrow indicator to ‘SPECIAL’ using the UP or DOWN button.
2. Press the SET button.
COLOR : choose color or B/W mode
-ON : color mode
-OFF : B/W mode
-AUTO1 : generally color mode, B/W mode in low luminance.
-AUTO2 : AUTO2 is identical with AUTO1 under SENSE UP : AUTO condition.
SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL
-INT : Internal synchronization
-OFF : External
·If you choose ‘L/L’, you can adjust the desired phase. Press the SET button.
LINE LOCK
PHASE : 225
PRESS SET TO RETURN
COLOR DOME CAMERA 30 User’s Manual
Notes
•When the power frequency is 50Hz, you can not use
•When the power frequency is 60Hz, you can not use the
•‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power.
PRIVACY: To mask area which you want to mask
-OFF: Deactivation
-ON: Privacy mode activated
· Press the SET button.
·Move the arrow indicator to area you want to mask.
·Set ‘ON’ using LEFT or RIGHT button.
·Press the SET button and then set the area’s bounds with the method like MD1 Set. (see page 23)
·When completed, press the SET button.
RESET: To reset your camera to factory default condition
END: To move
EXIT: To finish setting menu
COLOR DOME CAMERA 31 User’s Manual