Operating Your Camera
AWC(Auto White balance Control): The white balance is automatically adjusted in a specific environment. In order to obtain the best result, press the SET button while the camera focuses on white paper. If the environment including the light source is changed, you have to adjust the white balance again.
MANUAL : To fine adjust, select the Manual mode. You can increase or decrease the red or blue factor while monitoring the difference on the screen. Set to 'MANUAL' mode and press the SET button. Increase or decrease the value for
Notes
•Proper White Balance may not be obtained under the following conditions, in these cases select the AWC mode.
When the scene contains mostly high color temperature object, such as a blue sky or sunset.
When the scene is dim.
If your camera faces fluorescent lamp directly or is installed in the place of the changing illumination.
MOTION DETECTION
Whenever your camera detects motion of object displaying ‘MOTION DETECTED’ with the number counted up on the screen.
1.Press the SET button to display the SETUP menu and move the arrow indicator to 'MOTION DET.' using the UP or DOWN button.
COLOR DOME CAMERA 22 User’s Manual
2. Set ‘MOTION DET.’ to the desired mode using LEFT or RIGHT button.
|
| SETUP |
CAMERA | ID | OFF |
BACKLIGHT | WDR | |
WHITE | BAL. | |
MOTION | DET. | OFF |
IRIS |
| LEVEL |
SHUTTER | OFF |
MD1: Your camera detects the object’s motion by outline or difference of a color tone, so this mode is very useful for the daytime or observing small moving object.
Press SET button.
Move the arrow indicator to ‘AREA SET’ using UP and DOWN button, and then press the SET button.
Set the areas you want to observe.
·You can adjust the top, bottom, left and right base lines by 13 steps from top to bottom, 18 steps from left to right with an increment of 1.
COLOR DOME CAMERA 23 User’s Manual