Connection
Connecting to Power
Operating Your Camera
Configuration of The Menu
• Use AC 24V / 300mA or DC 12V / 500mA power source.
For DC Power Type
•For DC power as the voltage drop according to the length of the cable in the above table, a camera may malfunction if there is an excessively long cable run.
Resistance of copper wire [at 20C˚ (68˚F)]
Copper wire size (AWG) | #24(0.22mm2) | #22(0.33mm2) | #20(0.52mm2) | #18(0.83mm2) |
Resistance ( Ω / m) | 0.078 | 0.050 | 0.030 | 0.018 |
Voltage Drop (V/m) | 0.028 | 0.018 | 0.011 | 0.006 |
* Voltage for camera operation: 12V DC ±10% |
* Voltage drops in the above table are variable according to types of cable manufacturer. |
Notes |
• Be sure to connect power only after all the installation is complete. |
• Note that AC or DC adaptor is not supplied with camera. |
• Use the UL listed, class 2 power transformer of AC 24V adaptor. |
SETUP MENU
CAMERA ID (see page 17) |
|
| ||||
• OFF | • ON |
|
|
|
| |
BACKLIGHT (see page 20) |
|
| ||||
• WDR |
| • BLC | • OFF |
|
| |
WHITE BAL. (see page 21) |
| |||||
• | • | • AWC | • MANUAL | |||
MOTION DET. (see page 22) |
| |||||
• OFF | • MD1 | • MD2 |
|
| ||
IRIS LEVEL CONTROL (see page 25) | ||||||
• LEVEL |
|
|
|
|
| |
SHUTTER (see page 26) |
|
| ||||
• OFF | • 1/100 (1/120) | • MANUAL | ||||
SENSE UP (see page 27) |
|
| ||||
• Auto | • OFF |
|
|
|
| |
GAIN (see page 28) |
|
|
| |||
• OFF | • | • |
|
| ||
SSNR (see page 28) |
|
|
| |||
• OFF | • LOW | • MIDDLE | • HIGH | |||
SPECIAL (see page 30) |
|
| ||||
• COLOR | • SYNC | • PRIVACY | • RESET | |||
• END |
| • EXIT |
|
|
| |
• Ground should be connected to the GND terminal. |
COLOR DOME CAMERA 14 User’s Manual
EXIT
COLOR DOME CAMERA 15 User’s Manual
