Operating Your Camera
3. Press SET button.
CANERA ID
POS CLR RESET END
4. You can enter up to 16 characters.
Move the cursor to
Select the desired character by using UP or DOWN button.
•The factory defualt characters are A, B, ···, a, b, ···, .,
CAMERA ID
POS CLR RESET END
Press the SET button to confirm the blinking character. The first character is saved and the cursor in the bottom of the screen moves to the next position.
Repeats steps , and until you create the full name you want.
Notes
•If you make a mistake while entering name
Move the cursor to ‘CLR’, press ‘SET’ button.
After erasing the character from right to left, correct the character again.
COLOR DOME CAMERA 18 User’s Manual
5.Select the position at which the CAMERA ID will be located on the screen.
Move the cursor to 'POS' and press SET button.
CAMERA ID
POS CLR RESET END
The CAMERA ID is displayed on the
FRONT DOOR |
Select the position by using the
FRONT DOOR |
6. When completed, move the cursor to 'END' and press SET button.
COLOR DOME CAMERA 19 User’s Manual