Operating Your Camera
·Move the arrow indicator to 'TOP' using the UP or DOWN button and increase or decrease the value using the LEFT or RIGHT button. Repeat the procedure for bottom, left and right.
Tips on Using the Motion Detection Feature
• As you increase or decrease MD LEVEL, the areas’ sensitivity is increased or |
decreased for object. |
18 |
13 |
Maximum |
6 |
5 |
Minimum |
• After selecting zone and sensitivity, perform a test operation to make sure it |
works properly. |
• If the lighting flickers, the motion detection feature might not work properly. |
• The object should occupy 10% or more of its zone. The bigger the object, the |
higher sensitivity. |
• If the brightness of an object changes rapidly by sudden lighting change, the |
camera may detect it as a motion. |
· When completed, press SET button.
MD2: Your camera detects object’s motion by the variation of brightness, so this mode is very useful for night or observing large moving object. Also MD2 enables you to set seperated areas.
Press SET button.
Move the arrow indicator to ‘AREA SET’ like MD1. 
Set the areas you want to observe of the 48 areas.
·Move the cursor to the area you want to observe, and then press the SET button.
·After setting, move the cursor to edge in any direction and then press the button just one more, let ‘END’ blink.
·Press the SET button.
Notes
•If you set some areas of 48 areas, your camera detects the object’s motion within the areas you set.
COLOR DOME CAMERA 24 User’s Manual
• Your camera can count up to 999. If you reset your camera with selecting |
‘RESET’ in SPECIAL menu or turn it off and on, your camera’ll count up from 0. |
• When this feature is activated, another algorithm may take more time to be operated. |
• This system does not guarantee prevention of fires or thefts. The manufacturer |
is not responsible for any accident or damage. |
IRIS LEVEL CONTROL
You can control the brightness of the screen.
1.Press the SET button to display the setup menu and move the arrow indicator to 'IRIS' using the UP or DOWN button and press SET button.
2.Set ‘LEVEL’ to the desired brightness using LEFT or RIGHT button.
|
| SETUP |
CAMERA | ID | OFF |
BACKLIGHT | WDR | |
WHITE | BAL. | |
MOTION | DET. | OFF |
IRIS |
| LEVEL |
SHUTTER | OFF | |
3. When completed move the arrow indicator to ‘END’ and press the SET button.
COLOR DOME CAMERA 25 User’s Manual
