Cobra Electronics LI7200WX owner manual Voice Activated Transmit VOX, Memory Locations

Page 9

10293_LI7200WX_vB.qxd 9/5/07 10:55 AM Page 12

Mode Functions

Operation

Voice Activated Transmit (VOX)

•

In VOX mode, your microTALK® radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

Introduction

Operation

Customer Assistance Warranty

10 Memory Locations

•

Your microTALK® radio has 10 Memory Locations for storing your most frequently used channels and channel/privacy code combinations. These Memory Locations can be selected individually or can be scanned. (See page 21 for memory location scan.)

Mode Button

VOX Icon

Channel Buttons

Mode Button

VOX Sensitivity Level

To turn VOX mode on or off:

1.Press the Mode button until the VOX icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to turn VOX on or off.

3.Choose one of the following:

a.Press the Mode button to enter the selected on or off setting and proceed to other functions.

b.Press the Lock/Enter button to enter the selected on or off setting and return to Standby mode.

To set VOX sensitivity:

1.Press the Mode button until the VOX icon flashes and the current sensitivity level is displayed.

The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01 being the least sensitive level.

Mode Button

Memory Icon

Channel Buttons

Lock/Enter Button

To program a memory location:

1.Press the Mode button until the Memory icon and the memory location flash on the display.

2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Lock/Enter button to enter

a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select a channel (1 through 22).

5.Press the Lock/Enter button.

The CTCSS icon and privacy code numbers will flash on the display.

2. Press the Channel Up or Channel Down

Channel Buttons

button to change the setting.

 

3. Choose one of the following:

a. Press the Mode button to enter the selected setting and proceed to other functions.

b. Press the Lock/Enter button to enter the selected setting and return to Standby mode.

12

13

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Making Life Easier and Safer Warranty and Trademark Acknowledgement Product FeaturesFeatures Trademark AcknowledgementReplace battery compartment cover and belt clip Avoid exposure to extreme temperaturesCaring for Your microTALK Radio Estimated operation time on full charge 12 hoursFor charging microTALK radios in desktop charger Using Your RadioInsert radios into desktop charger as shown Plug 120-volt adapter into electrical outletChannels To switch from high to medium to low powerListening for a Response Call Button To alert another person that you are callingSignal Strength Meter Lock FeatureAuto Squelch/Maximum Range MicroTALK RangeScrolling through Mode Functions Mode FunctionsPrivacy Codes Set Ctcss Privacy CodesSet DCS Privacy Codes Standby modeTo select a DCS privacy code NOAA* All Hazards Radio ChannelsMemory Locations Voice Activated Transmit VOXChoose one of the following Press the Mode button toTo recall a stored memory channel location While recalling a stored memory locationTo de-program a memory location Channel ScanTo scan channels Press the Channel Up or Channel Down button to Press the Mode button to proceed to set privacyPrivacy Code Scan Select Channel To scan privacy codesMemory Location Scan Press and hold the Talk button to communicate onTo scan memory locations VibrAlert and Call Alert To change call settingsCall Tone Settings Keystroke TonesRoger Beep Confirmation Tone General Specifications General Specifications FCC LicenseProduct Service Questions Product Service
Top Page Image Contents