Included In This Package
Installation And
Included In This Package
•
You should find all of the following items in the package with your CobraMarine VHF radio:
Transceiver* | Transceiver Surface Mount Kit | Microphone |
Microphone MountingKit | Operating Instruction Manual | Warning Sticker |
GPS Interface Cable
*The term transceiver will be used to identify the main unit containing the LCD screen and controls. Radio will be used to identify the entire equipment including transceiver, microphone, antenna, and any attached external speakers.
Mounting And
Powering The Radio
Installation And
Mounting And Powering The Radio
•
Before using your CobraMarine VHF radio, it must be installed on your vessel.
Installing Your Radio
Choose a location for your radio where it will be conveniently accessible with the following factors in mind:
■The leads to the battery and the antenna are best kept as short as possible.
■The antenna must be mounted at least 3 feet from the transceiver.
■The radio and all speakers need to be far enough from any magnetic compass to avoid deviation due to the speaker magnet.
■There needs to be free air flow around the
Surface Mount
A Surface Mounting kit is included with your CobraMarine VHF radio to allow its installation on almost any flat surface.
Surface Mounting Kit | To Mount The Transceiver |
| On Almost Any Flat Surface: |
1. Use the mounting bracket as a template to drill holes for the mounting screws.
2. Attach the mounting bracket to the chosen surface.
3. Attach the transceiver to the mounting bracket with the locking knobs.
4. Tilt the transceiver to a convenient angle and tighten the locking knobs.
Tilt Lock Knobs
|
|
|
|
26 English | Nothing Comes Close to a Cobra® 27 |