Cobra Electronics PR 255 VP Speaker/Microphone/Charge Jack, MicroTALK Range, Ctcss Privacy Codes

Page 6

9508-PR255-2VP-D-FinalC #17 3/29/06 3:36 PM Page 6

Using Your Radio

Operation

Speaker/Microphone/Charge Jack

Your microTALK® radio can be fitted with an external Speaker/Microphone, freeing your hands for other tasks. This same jack also serves as the connecting point for

a wall charger/adapter.

Speaker/Microphone/ To attach a speaker/microphone:

Charge Jack

1.

Open the speaker/microphone/charge

 

 

 

tab on top of your microTALK® radio.

 

2.

Insert the plug into the speaker/

 

 

microphone/charge jack.

 

To connect a wall charger/adapter:

 

1.

Open the speaker/microphone/charge

 

 

tab on top of your microTALK® radio.

 

2.

Insert the wall charger/adapter plug

 

 

into the speaker/microphone/charge jack.

See Page 1 for batteries and charger instructions.

microTALK® Range

 

 

Operation

 

 

 

 

 

 

 

 

 

 

 

Introduction

Customer Assistance

Warranty

 

 

Scrolling Through the Mode Function

By scrolling through the Mode function, you will be able to select or turn on preferred features of your microTALK® radio. When scrolling through the Mode function, your radio features will be displayed in the same predetermined order:

Mode/Power Button

 

 

Set Privacy Code

 

 

 

 

 

Set VOX On/Off

 

 

 

Set VOX Sensitivity

 

 

 

Set Channel Scan

 

 

 

Set Privacy Code Scan

 

 

 

 

Set Call Tones

 

 

 

Set Roger Beep On/Off

CTCSS Privacy Codes

CTCSS (Continuous Tone Coded Squelch System) is an advanced tone coding system allowing you to select one of 38 privacy codes to reduce interference from other users on the channel.

If you are using a privacy code, both radios must be tuned to the same channel and privacy code to communicate. Each channel will remember the last privacy code you selected.

Your range will vary depending on terrain and conditions.

Mode/Power Button

To select a privacy code:

Maximum Range

Reduced Range

Reduced Range

In flat, open country your radio will operate at maximum range.

Buildings and foliage in the path of the signal can reduce the range of the radio.

Dense foliage and hilly terrain will further reduce the range of the radio.

On FRS Channels 8 through 14, your radio automatically switches to low power, which will limit the range the radio can communicate.

Remember, you can achieve maximum range by using maximum range extender. See page 5 for details.

Privacy Code

Channel Button

1.After selecting a channel, press the Mode/ Power button until the small numbers next to the channel number flash on the LCD.

2.Press the Channel Up or Channel Down button to select a privacy code. You can hold the Channel Up or Channel Down button for fast advance.

3.When your desired privacy code is displayed:

a.Press the Mode/Power button to enter the new setting and proceed to other functions.

b.Press the Lock button to enter the new setting and return to Standby mode.

c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.

6 English

Nothing Comes Close to a Cobra® 7

Image 6
Contents Making Life Easier and Safer Features Product FeaturesWarranty and Trademark Acknowledgement Limited One-Year Warranty on Radios & ChargerTo install or replace batteries Caring for Your microTALK RadioRemove Belt Clip Rechargeable Batteries Charger Communicating with Another Person To talk to another person Using Your RadioAuto Battery Save Channels To select a channelLight/Max Range To temporarily turn off auto squelch Call Button To alert another person that you are callingDisplay Illumination To turn maximum range extender onSpeaker/Microphone/ To attach a speaker/microphone Scrolling Through the Mode FunctionSpeaker/Microphone/Charge Jack MicroTALK RangeMode/Power Button To Set VOX Sensitivity Mode FunctionsMode/Power Button To Turn VOX Mode On Or Off Voice Activated Transmit VOXThis will return the radio to Standby mode Privacy Code ScanTo scan privacy codes Roger Beep Confirmation Tone Five Call Tone SettingsMode/Power Button To turn roger beep on or off Press the Channel Up or Channel DownGeneral Specifications and Licensing General SpecificationsProduct Service Product Service Questions