9508-PR255-2VP-D-FinalC #17 3/29/06 3:36 PM
Mode Functions
Operation
Voice Activated Transmit (VOX)
•
In VOX mode, your microTALK® radio can be used
Mode/Power Button To Turn VOX Mode On Or Off:
1. Press the Mode/Power button until the VOX icon flashes on the display. The current On or Off setting is displayed.
|
| 2. Press the Channel Up or Channel Down | |
VOX Icon |
| ||
| button to turn VOX On or Off. | ||
|
| ||
|
| 3. Choose one (1) of the following: | |
|
| a. Press the Mode/Power button to enter the | |
|
| selected On or Off setting and proceed | |
Channel Button | |||
| to other functions. | ||
|
| ||
|
| b. Press the Lock button to enter the | |
|
| selected On or Off setting and return | |
|
| to Standby mode. | |
|
|
Mode/Power Button To Set VOX Sensitivity:
1.Press the Mode/Power button until the VOX icon flashes and the current sensitivity level is displayed.
VOX Sensivity Level |
| The current VOX sensitivity level is | |
|
| displayed with letters “LE” and a Number | |
|
| 1 through 5, with Number 5 being the | |
|
| most sensitive level and Number 1 | |
|
| being the least sensitive level. | |
Channel Button | |||
|
|
2.Press the Channel Up or Channel Down button to change the setting.
3.Choose one (1) of the following:
a.Press the Mode/Power button to enter the selected setting and proceed to other functions.
b.Press the Lock button to enter the selected setting and return to Standby mode.
8 English
Page 8
|
| Operation |
|
|
|
|
|
|
|
|
|
| |
| Introduction | Customer Assistance | Warranty |
|
|
Channel Scan
•
Your microTALK® radio can automatically scan channels.
Mode/Power Button To scan channels:
1.Press the Mode/Power button until the Scan icon and the channel numbers appear on the display.
|
| 2. Press the Channel Up or Channel Down |
Scan Channels |
| |
|
| button to begin scanning channels. |
|
| The radio ignores specific privacy |
|
| codes while scanning channels. |
|
| |
|
|
|
Channel Button |
| The Scan icon will continue to be displayed |
|
| |
|
| when scan is on. Your radio will continue to |
|
| scan all channels and stop if an incoming |
|
| transmission is detected. Your radio will |
|
| remain on that channel for 10 seconds. |
While setting channel scan, if you do not press any buttons for 15 seconds your radio will automatically return to Standby mode on the channel or channel/privacy code displayed before you entered mode functions.
Nothing Comes Close to a Cobra® 9