Mode Functions
Operation
VibrAlert® And Call Tones
•
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently, or both.
Mode Button | To Change Call Settings: |
| |
VibrAlert® + Ring | |||
| 1. Press the Mode button until |
| |
| the Call Setting icon flashes |
| |
| on the display. The current |
| |
| setting (vibrate + ring, |
| |
|
| ||
Channel Button | VibrAlert® Only | ||
vibrate only, or ring only) | |||
|
| ||
| is displayed. |
|
2.Press the Channel Up or Channel Down button to
change the call setting. | Ring Only |
3.Choose one (1) of the following:
a.Press the Mode button to enter the new setting
and proceed to other functions.
b.Press the Lock button to enter the new setting and return to Standby mode.
Ten (10) Call Tone Settings
•
You can choose between ten (10) different Call Tone settings to transmit a unique call alert.
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.
Mode Button | To Turn Roger Beep On Or Off: |
| 1. Press the Mode button until the |
| Roger Beep icon flashes on the display. |
| The current On or Off setting is displayed. |
| 2. Press the Channel Up or Channel Down |
Roger Beep On | |
| button to select roger beep On or Off. |
| 3. Choose one (1) of the following: |
| a. Press the Mode button to enter |
| the new setting and proceed to |
Channel Button | |
| other functions. |
| b. Press the Lock button to enter |
| the new setting and return to |
| Standby mode. |
Keystroke Tones
•
With Keystroke Tones turned On, your radio will sound beeps each time you press a button or change a setting.
Mode Button | To Change Keystroke Tones: |
| 1. Press the Mode button until the Keystroke |
| Tones icon flashes on the display. The current |
Mode Button
To Change A Call Tone Setting:
On or Off setting is displayed. |
Call Tone Setting
Channel Button
1.Press the Mode button until the letter “C” and the current call tone Number (01 through 10) is displayed.
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.Choose one (1) of the following:
a.Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock button to enter the new setting and return to Standby mode.
Keystroke Tones On
Channel Button
2.Press the Channel Up or Channel Down button to turn keystroke tones On or Off.
3.Choose one (1) of the following:
a.Press the Mode button to enter the new setting and return to Standby mode.
b.Press the Lock button to enter the new setting and return to Standby mode.
18 English
Nothing comes close to a Cobra™ 19