Cobra Electronics pmnPR3100DX owner manual Mode Functions

Page 7

Mode Functions

Operation

CTCSS Privacy Codes

•

CTCSS (Continuous Tone Coded Squelch System) is an advanced tone coding system allowing you to select one (1) of 38 privacy codes to reduce interference from other users on the channel.

If you are using a privacy code, both radios must be tuned to the same channel and privacy code to communicate. Each channel will remember the last privacy code you selected.

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

Voice Activated Transmit (VOX)

•

In VOX mode, your microTALK® radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

Mode Button

To Turn VOX Mode On Or Off:

 

1. Press the Mode button until the VOX icon

 

flashes on the display. The current On or Off

 

setting is displayed.

Mode Button

To Select A Privacy Code:

 

1. After selecting a channel, press the Mode

 

button until the small numbers next to the

 

channel number flashes on the display.

VOX Icon

2.

Press the Channel Up or Channel Down

 

button to turn VOX On or Off.

3.

Choose one (1) of the following:

 

a. Press the Mode button to enter the

Privacy Code

Channel Button

2. Press the Channel Up or Channel Down

button to select a privacy code. You can hold

the Up or Down button for fast advance.

3. When your desired privacy code is displayed,

choose one (1) of the following:

a. Press the Mode button to enter the new

setting and proceed to other functions.

b. Press the Lock button to enter the new

setting and return to Standby mode.

c. Do not press any buttons for 15 seconds

Channel Button

Mode Button

selected On or Off setting and proceed

to other functions.

b. Press the Lock button to enter the

selected On or Off setting and return

to Standby mode.

To Set The Sensitivity:

1.Press the Mode button until the VOX icon flashes and the current sensitivity level is displayed.

to enter the new setting and return to

Standby mode.

VOX Sensitivity Level

Channel Button

The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01 being the least sensitive level.

2.Press the Channel Up or Channel Down button to change the setting.

3.Choose one (1) of the following:

a.Press the Mode button to enter the selected setting and proceed to other functions.

b.Press the Lock button to enter the selected setting and return to Standby mode.

8 English

Nothing comes close to a Cobra™ 9

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Customer Assistance Operators Making Life Easier And SaferFor Assistance In Canada or the U.S.A Automated Help DeskFeatures Backlit LCD Display Product FeaturesBasics To Get You Started Avoid exposure to extreme temperaturesBatteries To Install Or Replace Batteries Caring For Your microTALK RadioUsing Your Radio Call Button Volume To Adjust The VolumeSelectable HighLow Power Output To Switch From High To Low PowerSpeaker/Microphone To Attach Your Speaker/Microphone Scrolling Through Mode FunctionsSignal Strength Signal Strength Meter Speaker/Microphone JackMode Functions Through Ten 10 Memory LocationsTo Program a Memory Location On the displayChannel Scan To De-Program a Memory LocationTo Scan Channels Privacy Code Scan This will return the radio to Standby modeTo Scan Privacy Codes Memory Location Scan You entered mode functionsTransmission. This will return the radio to Standby mode Press the Mode button to proceed to other functionsIs displayed To Change Call SettingsSetting vibrate + ring Change the call settingFrequency General SpecificationsGeneral Specifications Power SupplyProduct Service Licensing and Product ServiceLimited 1-Year Warranty Warranty
Top Page Image Contents