Binatone 950 manual Installation, Removing the Belt Clip, Installing the Belt Clip

Page 2

2. Installation

2.1 Removing the Belt Clip

a.Pull the Belt Clip latch up (away from the Action 950)

b.While pulling the Belt Clip latch,slide the Belt Clip up as shown in Figure1.

2.2 Installing the Belt Clip

a.Slide the Belt Clip into the slot as shown in Figure2.

A “click” indicates the Belt Clip is locked into position.

2.3 Installing the Batteries

Belt Clip latch

Figure 1

Figure 2

Figure 3

Figure 4

Caution: Observe the proper battery polarity orientation when installing batteries. Incorrect positioning can damage both the batteries and the unit.

a.Unclip the battery cover latch at the bottom of the cover, and lift the battery cover off.

b.Insert the 4 “AAA” size rechargeable batteries by following the +/- polarity marking inside the Battery Compartment as shown in Figure 3.

c.Replace the Battery Compartment Cover. See Figure 4.

Important

Read these Safety Warnings before you charge the batteries. When placing the Action 950 in the charger, use only the power supplies listed in the user instructions supplied with the Action 950. Don’t try to recharge non-rechargeable batteries.

Make sure the battery compartment cover is securely locked in place when you are charging the batteries.

Dispose of used batteries safely and in a way that will not harm the environment- never try to burn them or put them anywhere they

could get burnt or punctured.

Don’t leave dead batteries in your Action 950 units.

They might leak if you do.

2.4 Charging the Batteries

a.Insert the small plug on the end of the mains adaptor into the Power-in Connection Jack at the back of the desktop charger.

b.Plug the mains adaptor into a 240V AC, 50Hz main socket with the switch on the socket set to OFF.

c.Switch ON the mains socket.

Use only the mains adaptor provided.

Using any other adaptor will result in non-compliance with EN60950-1 and will invalidate any approvals & warranty.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents LCD Screen PWR/VOL SwitchLCD Screen PTT Push to Talk buttonRemoving the Belt Clip InstallationInstalling the Belt Clip Charging the BatteriesDWWHU\ Phwhu Important Charge the unit for 10-14 hoursOperation To switch OFFSetting the Ctcss sub-channel Turning the Unit ON/OFF To Turn onReceiving Setting the DCS Advanced Digital CodeSetting the VOXVoice ActivatedSensitivity Transmittingsending speechCall-Ring tone Activating the Vibrator modeSetting the Roger Beep Activating the Auto Channel ScanAuxiliaryFeatures SpecificationsChannel Frequency Table SafetyCleaning and Care Guarantee Troubleshooting Guide Symptom Solution

950 specifications

The Binatone 950 is a remarkable entry in the world of cordless phones, combining user-friendly features with advanced technologies to meet the needs of modern households. This phone stands out due to its sleek design and practical functionality, making it a popular choice for users seeking both style and performance.

One of the main features of the Binatone 950 is its DECT technology, which ensures high-quality audio and extended range. DECT (Digital Enhanced Cordless Telecommunications) not only enhances clarity but also provides a secure connection, minimizing the risk of interference from other devices. This technology allows users to move freely around their home or office without losing signal quality, an essential factor for busy lifestyles.

The Binatone 950 boasts a large, easy-to-read display that displays incoming calls, phonebook entries, and other essential information clearly. This feature is particularly beneficial for older users or those who may have difficulty reading smaller screens. Moreover, the phone includes a comprehensive phonebook capable of storing numerous contacts, making it easy to keep track of important numbers.

Another notable characteristic is the phone’s caller ID functionality. This feature allows users to see who is calling before they answer—an excellent way to avoid unwanted calls. Additionally, users can save a blacklist of unwanted numbers to block specific callers, providing an added layer of convenience and security.

Battery life is another highlight of the Binatone 950. It is equipped with a long-lasting rechargeable battery, providing hours of talk time, ensuring that users can communicate without the constant need to recharge. The phone also features an eco mode, promoting energy efficiency and reducing power consumption.

The Binatone 950 is designed for ease of use, with straightforward controls that make navigating its features simple. The intuitive interface accommodates users of all ages, allowing for seamless operation. Furthermore, the phone supports multiple handsets, which can be connected to a single base unit, making it suitable for larger homes or offices where communication needs vary.

In conclusion, the Binatone 950 combines cutting-edge technologies with user-friendly design elements. Its features, such as DECT technology, caller ID, a robust phonebook, and eco-friendly battery life, make it a worthwhile investment for anyone in need of a reliable and stylish cordless phone. Whether for personal use or in a professional setting, the Binatone 950 delivers quality and performance that users can depend on.
Top Page Image Contents