Binatone 950 Operation, Turning the Unit ON/OFF To Turn on, To switch OFF, Changing Channels

3. Operation

3.1 Transmitting range

The talk range depends on the environment and terrain. It will reach up to about 10km in wide open spaces, without obstructions such as hills or buildings. Don’t try to use two PMR units which are less than 1.5m (5 foot) apart, otherwise you may experience interference.

Important safety warning

To reduce radio frequency exposure when you are using your Action 950, hold the unit at least 5cm (2 inches) away from your face.

Never use your Action 950 outdoors during a thunderstorm. Don’t use the Action 950 in the rain.

If your Action 950 gets wet, turn it off and remove he battery. Dry the battery compartment and leave the cover off for a few hours. Don' t use the unit until it is completely dry.

Keep the Action 950 out of reach babies and young children.

3.2 Turning the Unit ON/OFF

To Turn ON;

a. Rotate the POWER/VOL button clockwise until the LCD Screen turns ON and displays the current channel.

To switch OFF;

b. Rotate the POWER/VOL button counter clockwise until the LCD screen turns blank.

Note: When you rotate the PWR/VOL button to turn ON, the volume will also turn on at its minimum level and will increase as the button is rotated further.

3.3 Changing Channels

Your Action 950 has 968 Channel Combinations

The Action 950 has 8 available main channels, To communicate with otherAction 950 users within range,

you must all have your Action 950 tuned to the same channel.

a. Press the MENU button once, the current channel number flashes on the LCD Screen.

b. Press the UP or DOWN button to select the desired channel. The channel changes from 1 to 8, or vice versa.

c. Press the PTT button to confirm the channel setting.

Note: Refer to the “Channel Table” section of this Owner’s Manual for detailed frequency listing.

3.3.1 Setting the CTCSS sub-channel

Each channel also has 38 sub-channels to let you set up a group of users within the same channel for more private communication. If you have set the sub-channel, you can only communicate with other PMR users tuned to the same channel and sub-channel.

To turn the sub-channel function off, simply set the

sub- channel to 0 (zero). You can communicate with any Action 950 user set to the same channel who also turns off the sub-channel operation (or with units that do not have this feature ).

a. Press the MENU button twice,the current CTCSS sub-channel number flashes on the LCD Screen.

b. Press the UP or DOWN button to select one of the 38 CTCSS sub-channels.

c. Press the PTT button to confirm the sub-channel setting.