GoVideo GV8050 manual Setting the Date and Time

Setting the Date and Time

Tip:

If the clock is not already set, pressing MENU will bring up the

SET CLOCK MENU. If the clock is set, you can get into the SET CLOCK MENU from the SETUP MENU.

SET MONTH : 01

J A N	1994				12:00 AM
SU MO TU WE TH FR SA
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29

3031

WHEN OK PRESS MENU

Tip:

Do not press QUIT while in the

SET CLOCK MENU unless you

want to ‘lose’ your changes.

If you plan on using the Timer Record and the Date and Time Stamp features of your 8mm/VHS Dual-Deck VCR, you’ll need to set the correct date and time.

To set the current date and time:

1.Press MENU . The SET CLOCK MENU will appear.

2.Follow the prompt above the calendar to set the clock. Use the numerical keys to enter information. As you enter each item of information, the prompt will automati- cally go to the next item. If you don’t need to change the information for a particular item, press SELECT to move to the next item. You will enter the following items of information.

Month • January is 0 1 , October is 1 0 , etc.

Year • Enter only the last two digits, for example

94 for 1994.

Day • Enter today’s date. If today is the fourth, enter 0 4 .

Hour • Enter only the hour. At 4:28, the hour is 0 4 .

Minute • Enter only the minute. At 4:28, the minute is 2 8 .

AM or PM • Enter 1 for AM or 2 for PM.

3.	If you need to go back and change anything, press SELECT
	repeatedly until you get back to that item. Then, follow
	the instructions in step 2 to change that information.
4.	At any time, press MENU to save this information and
	return to the SETUP MENU.
5.	When you’re back in the SETUP MENU, press QUIT to
	exit the menu system.

8SETTING THE DATE AND TIME