GoVideo GV8050 manual Tracking VHS Deck only, Video Sequencing and Loop Play

Models: GV8050

1 110
Download 110 pages 40.67 Kb
Page 56
Image 56

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

Tip:

If you press STOP , and then

FWD or REW , the tape will

fast-forward or rewind

without the picture on the

screen. Do this whenever

you don't really need to

search the picture, because

it is much faster and it

causes less wear on the

tape and on the VCR heads.

Tip:

You can use the manual tracking buttons during Play Still or Slow Motion viewing to reduce picture jitter. You can also use these buttons to minimize noise when playing back stereo audio.

Tracking only affects tape playback. It has no effect during recording. The tracking buttons do not affect the 8mm deck, because 8mm tracking is always automatically controlled.

Press REW to enter Reverse Picture Search. The tape will run in reverse at high speed, and you will be able to see

the picture. will blink on the Front Panel Display. Press REW again to resume playback.

Press and hold REW to enter Reverse Jet Search (VHS only). The tape will run in reverse at extra high speed,

and you will be able to see the picture. will blink on the Front Panel Display. Release the REW key to resume playback.

When you are in any special playback function, press PLAY

to

resume normal playback, or STOP to stop the tape. You can

 

also Pause, Rewind, Fast-Forward and Slow down the playback by pressing the appropriate keys.

Tracking (VHS Deck only)

Occasionally, when you play a tape in the VHS deck that was recorded on a different VCR or on a VHS Camcorder, visual noise (white streaks) may appear if the recorded tracks on it do not align precisely with the playback heads on your deck.

Your 8mm/VHS Dual-Deck VCR is equipped with an Auto- matic Digital Tracking System. This system is activated whenever you insert a tape to play.

Sometimes, however, you may need to use the manual tracking keys to adjust the picture. Press the TRK/MENU

or the TRK/MENU key to move the white streaks up or down and out of the picture. When you do this, the Automatic Digital Tracking System is disabled. It can be reactivated again by pressing the AUTOTRACK key behind the door on the right-hand tower on the front of the 8mm/VHS Dual-Deck VCR.

Video Sequencing and Loop Play

With Video Sequencing, your 8mm/VHS Dual-Deck VCR will play an 8mm tape, then automatically activate the VHS deck to begin playing when the 8mm tape is through.

56GO VIDEO REFERENCE GUIDE

Page 56
Image 56
GoVideo GV8050 manual Tracking VHS Deck only, Video Sequencing and Loop Play