Setup
Menu
SETUP MENU
1:TUNER/CHANNEL SETUP
2:SET CLOCK
3:SET AUTO FEATURES
MENU KEY FOR NEXT MENU
SELECT KEY TO CHOOSE ARROW KEYS TO CHANGE
The SETUP MENU contains three submenus: TUNER/ CHANNEL SETUP, SET CLOCK, and SET AUTO FEATURES. Use the SETUP MENU when you first connect your
TUNER/CHANNEL MENU
1: ANTENNA IN | - STD CATV |
2:AUTO PROGRAM
3:SET CHANNEL MEMORY
4: TUNER AUDIO | - STEREO |
MENU KEY FOR PREV MENU
SELECT KEY TO CHOOSE
ARROW KEYS TO CHANGE
Note:
Don’t select AUTO PROGRAM unless you are prepared to wait a few minutes while the channel selection process completes itself. If you interrupt the process, you’ll have to start over.
TUNER/CHANNEL MENU
Use the TUNER/CHANNEL MENU to set your antenna source, channel memory, and tuner audio. The TUNER/ CHANNEL MENU has four items:
1.Press 1 or press SELECT to set ANTENNA IN to the source of your antenna signal. Select TV if you do not subscribe to a cable system. If you subscribe to cable and have no cable converter box, you will most likely need to set ANTENNA IN to STD CATV. However, some cable sys- tems use HRC CATV or IRC CATV. Call your cable company if you’re not sure which setting to use. If you have a cable converter box, you don't need to set the ANTENNA IN (the cable box bypasses this setting).
2. Press 2 or use the arrow keys to move to AUTO PROGRAM. Press SELECT if you want the VCR to automati- cally program the CHANNEL MEMORY. AUTO PROGRAM goes through all the possible TV or cable channels one by one. Any time it finds a channel with a signal (a channel that you receive), it programs that channel into CHANNEL MEMORY. Once you have run AUTO PROGRAM, the channel selector (arrow keys) on your 8mm/VHS Dual- Deck VCR will stop only at the channels which you receive.
