GoVideo GV8050 manual Audio Mixing

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

Tip:

Turn HIFI AUDIO in the VHS MENU to ON if you want to monitor the old audio during the dubbing process. Turn HIFI AUDIO to OFF if you want to monitor the new audio from Line 1.

7.	Press DUB .
	➤ DUB on the Front Panel Display will be ON. The On
	Screen Display will say DUB REC. The audio from
	Line 1 will record onto the VHS tape, replacing the
	existing audio.
8.	Press STOP to stop Audio Dubbing.

Tip:

In order to listen to the audio that you are mixing together, use headphones if your mixer has a headphone jack. If not, you will need to split the output from the mixer with y-cords, and connect one cord to the Dual-Deck VCR input, and the other cord to your audio system or TV monitor.

Audio Mixing

If you have an audio mixer, you can record new audio while keeping the old audio. For example, you could add a soundtrack or voice-over narration to a home movie, while keeping the conversation in the movie.

Connect the AUDIO OUT from the back of the 8mm/VHS Dual-Deck VCR to the INPUT on the audio mixer. Connect your other audio sources into the mixer. Then, connect the OUTPUT of the mixer to the LINE 1 AUDIO IN on the front of the Dual-Deck VCR.

Follow the above procedures for Audio Insert or Audio Dub. For Audio Insert, set the TV View to 8mm (so that the 8mm tape's audio will go into the mixer). For Audio Dub, set the TV View to VHS (so that the VHS tape's audio will go into the mixer).

ADDING NEW AUDIO 93