▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
“My On Screen Display has a message that says LOAD, DRUM or
REEL ERROR.”
“Sometimes I can’t EJECT a tape using my remote control.”
"I can't reset the 8mm Tape Counter."
“The power went out, and now my VCR doesn’t work.”
The VCR has had difficulty with the tape loading mecha- nism. To reset, turn the power off, and on again. If this does not clear the error, unplug the VCR from the wall and inspect both tape slots for foreign objects or crooked tapes.
If there is scene information in the Edit List from an Auto- matic Assembly Edit, the 8mm deck will not allow you to eject the tape using the remote control. This is because if you eject the tape, you will lose your scene programming. We don’t want to make it too easy to do this by accidentally ejecting the 8mm tape. You can still eject the tape using the eject button behind the Left Tower door — this will erase all your Edit List settings.
If there is scene information in the Scene Edit List from an Automatic Assembly Edit, you will not be able to reset the Tape Counter on the 8mm deck. This is to prevent you from losing your scene programming. To clear unwanted pro- gramming, eject the 8mm tape using the Eject key behind the Left Tower Door.
A strong static electricity shock, or other unforeseen circum- stance, can cause the control system of your
If your 8mm/VHS