GoVideo GV8050 manual Copying Tape, 8mm

Copying

a Tape

Tip:

Make sure the Record Safety Tab on the VHS tape is intact. If it’s missing, and you’re sure you want to record onto that tape, you can put a piece of adhesive tape over the hole.

Use the Copy TapeTM feature to copy an 8mm tape onto a VHS tape:

1.Make sure the VHS tape is long enough to record the entire 8mm tape. You can increase the recording time on the VHS tape by changing the RECORD SPEED in the VHS MENU (LP is twice as long as SP; SLP is three times as long as SP.)

2.Insert your 8mm tape into the 8mm deck on the left side of the 8mm/VHS Dual-Deck VCR, and the VHS tape into the VHS deck on the right side.

3.Press COPYTAPE on the center front panel of the 8mm/VHS Dual-Deck VCR or on the remote control.

That’s it! The 8mm/VHS Dual-Deck VCR will make a perfect VHS copy of your 8mm tape.

If you wish to stop the copying procedure, press COPYTAPE again.

Summary of Recording Speeds

	SP	LP	SLP (EP)
VHS
T-60	1 hr	2 hrs	3 hrs
T-120	2 hrs	4 hrs	6 hrs
T-160	2 hrs 40 min	5 hrs 20 min	8 hrs
T-180	3 hrs	6 hrs	9 hrs
T-200	3 hrs 20 min	6 hrs 40 min	10 hrs
8mm
E6/P6-30	30 min	1 hr
E6/P6-60	1 hr	2 hrs
P6-90	1 hr 30 min	3 hrs
E6/P6-120	2 hrs	4 hrs
P6-150	2 hrs 30 min	5 hrs

COPYING A TAPE 11