▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

Humidity Requirements

If your Dual-Deck VCR is suddenly moved from a cold to a warm place, moisture may form inside the unit. Before operating, allow at least 2 hours after plugging in the power cord for your Dual-Deck VCR to dry completely. Failure to do so may cause damage to your Dual-Deck VCR and the tape. See "Environment" in the Technical Specifications section of thie Guide for specifications.

Service and Warranty

Never open your Dual-Deck VCR cabinet or touch the inside parts. To do so is dangerous and may cause damage. Do not try to disassemble your Dual-Deck VCR - there are no user- serviceable parts inside.

Servicing of your Dual-Deck VCR should be done by an authorized service center. For service information, see the Limited Warranty section of this guide.

Energy Conservation

Save energy. If you will not be using your Dual-Deck VCR for a long period of time, unplug the electrical cord.

Shipping Your Dual-Deck VCR

Carefully pack your Dual-Deck VCR in the original packing materials and carton for shipping.

CARE OF YOUR DUAL-DECK VCR 97

Page 97
Image 97
GoVideo GV8050 manual Humidity Requirements, Service and Warranty, Energy Conservation, Shipping Your Dual-Deck VCR