3Com 45-339 Lite-Strip Optical Fiber Stripper, Stripmaster Ribbon Fiber Plastic Polishing Fixture

Lite-Strip™

Optical Fiber Stripper

V-notch blades strip a wide range of outer cable jacket. Precision-ground, replaceable knife-type blades strip tight buffer tube insulations (900µm). Also strips mechanically strippable

coatings from 250 microns to 900 microns.

■Replaceable precision-ground blades cleanly strip buffer coatings

■New funneled hole makes cable insertion easier

■Improved spring mounting returns handles to original position after every application

■One-step, 900 micron stripping hole provides broader stripping range

■Extra durable to withstand normal drops without requiring tool realignment

■New gauge color makes fiber and hole identification easier

■Improved comfort-grip handles for an easier, more comfortable stripping process

Description	Fiber Sizes	Cat. No.
Lite-Strip™Optical Fiber Stripper (900µm/250µm)	125µm, 140µm	45-350

Stripmaster® Ribbon Fiber

Plastic Polishing

Fixture

■Universal fitting accepts all ST®, SC and FC connectors with 2.5mm ferrules

■Economically priced

■Grooved face for polishing efficiency

■Precision tool used by manufacturers, contractors and in tool kits

Description	Cat. No.
Plastic Polishing Fixture	45-342

Note: ST® is a registered trademark of AT&T.

Stainless Steel Polishing Fixture for Optical Fiber ST® and

SC Type Connectors

Produces polished fiber optic ST® and SC type connectors for optimum connector performance.

■Precision-machined, stainless-steel disk provides accurate polishing angle for desired end face finish

■Stainless-steel hardness maintains long life and resists uneven wear

■Stepped surface reduces drag and friction for easier polishing

Description Qty. Cat. No.

Polishing Fixture for Optical Fiber

Jacket Stripper

SC/ST® Type Connectors

145-341

Fiber Optic Tools

■Removes jacket from Ribbon Fiber without damage to the Kevlar® strength member of the Ribbon Fiber

Note: Frame and blade-set sold separately.

Description	Cat. No.
Stripmaster® Wire Stripper Frame only	L-5620
Blade-set for use with Corning Plenum and Riser Ribbon Fiber Cable	LB-1152
Blade-set for use with Corning “Fanout” Ribbon Cable	LB-1153

Note: Kevlar® is a registered trademark of DuPont.

Split-Tip Fiber Optic Swabs

■Split-tip design cleans fiber easier and more efficiently than other methods

■Tube/handle is pre-loaded with 99% isopropyl alcohol

■A single swab can be used for many cleanings or until the alcohol is gone

Description	Qty.	Cat. No.
Split-Tip Fiber Optic Swabs	Bag of 20	45-360

Note: ST® is a registered trademark of AT&T.

Polishing Films for Fiber

Optic Connectors

■ For optimum connector	45-338	45-337
	45-339

polishing results, we recommend a three-step procedure using 0.5µm, 3µm and 12µm 3 in. x 6 in. aluminum oxide polishing films

■Lot-to-lot consistency in our films means repeatable connector finishes on ceramic, stainless steel, plastic and composite ferrules

■A single sheet will typically yield 10 to 20 connectors when using the recommended 3-step procedure

Description	Color	Qty.	Cat. No.
0.5µm, 3” x 6”, Aluminum Oxide	Ivory	20 films/sleeve	45-337
3.0µm, 3” x 6”, Aluminum Oxide	Lt. Yellow	20 films/sleeve	45-338
12µm, 3” x 6”, Aluminum Oxide	Lt. Red	20 films/sleeve	45-339

G-32www.idealindustries.com 1-800-435-0705 for Customer Service