Channel Scan Operation

-Press the Up or Down Button to preview and hear the 5 available call melodies.

-Press the PTT button momentarily to confirm selection.

Refer to the PTT button (17) to transmit ring signal.

This feature allows you to monitor all channels automatically for valid sig- nals. While scanning, you can transmit and receive. When a signal is re- ceived, the scan is interrupted and will return to scan mode 5 seconds after reception is terminated.

NOTE: While the scan function is active, the MODE button will be inoperative. The scan mode will reduce the overall battery life because the battery save function is overridden.

To enable the channel scan mode:

-From GMRS standby mode, momentarily press the SCAN Button; (SC) will appear on the LCD display together with On.

-The radio will display each channel (1-15) in order as the scan mode operates to find an active main channel.

-When unit doesn’t find any signals and you want to transmit, press the PTT button to return to home channel operation. The transceiver will automatically resume scanning approximately 5 seconds after the communication is completed.

-If there is no activity and you want to leave the scan mode, press the SCAN button momentarily and the unit will return to normal operation; the SC icon and oF will appear momentarily and then disappear from the LCD display.

Auto Key Lock Selection

This feature prevents accidental channel change to the preferred settings of the unit. The Auto Key Lock function temporarily disables the Up, Down and Mode Buttons.