When the key tone feature is on, the Bell icon appears steady on the display, and the beep tones sound in response to button activation.
Caller Identification (ID) Select
The caller ID function allows you to assign an ID code between 1 and 10; this code accompanies your transmission whenever you call another party, and will appear at the receiving unit, provided it has caller ID capability.
To select a caller ID code for your unit:
-From GMRS standby mode, press the MODE button eight times; Id appears, together with a flashing ID and number (or oF) indication.
-If oF appears, press the Up or Down Button to select the desired caller identification code for your unit between 1 and 10.
-Press the PTT button momentarily to confirm selection.
Now, your caller ID number will accompany each transmission, and will appear on the receiving unit, if the receiving unit is so equipped, and vice- versa.
Call Ringer Selection Mode
The transceiver provides 3
To select your favorite call ringer melody:
-From GMRS standby mode, press the MODE button nine times;
C will appear on the display, together with a flashing number (or oF) between 01 and 03, and an appropriate call ring.
-Press the Up or Down Button to preview and hear the 3 available call melodies.
-Press the PTT button momentarily to confirm selection.
Refer to the PTT button (4) can also be used to initiate a call; pressing the button twice quickly will call another party on the same channel and trans- mit the call ring signal at the same time.
15