-Press the Up or Down button to toggle between the HI and Lo selections.
-Press the PTT button momentarily to confirm selection.
The display will indicate the current setting in GRMS standby mode.
VOX Selection Mode
This option enables you to have
To set radio for VOX operation:
-From GMRS standby mode, press the MODE button four times until the VOX icon flashes on the display.
-Press the Up or Down button to select VOX On (if oF appears flash- ing) and the
-Momentarily press the PTT button to confirm the VOX selection; the VOX icon will appear steady on the LCD display.
A VOX sensitivity of 5 is the most sensitive, and should be used in a rela- tively quiet surrounding. A VOX sensitivity of 1 is the least sensitive and should be used in a noisy surrounding.
VOX can be turned off by selecting oF as the setting.
Dual Watch Mode
This feature allows you to monitor two channels at the same time. While in dual watch mode, the unit will continuously monitor both the primary and dual watch channel. Received signals will be played for 5 seconds, then the unit will resume scanning the two channels. Pressing the PTT button during a received transmission will set the unit to transmit on the same channel. Pressing the PTT button when no signal is received will set the unit to transmit on the primary channel.
To set the Dual Watch Mode:
- From GMRS standby mode, press the MODE button five times; dc ap- pears on the display with the flashing DW icon. If the dual watch mode
13