Audiovox GMRS-7000 manual Power On/Off 15 Button, Monitor/Display Backlight Button

Page 8

GMRS-7000 OPERATIONAL MODES

WEATHER BAND

CHANNEL

SELECT

WEATHER

BAND ALERT

Controls:

Power On/Off (15) Button

GMRS BAND

CHANNEL

SELECT

CTCSS

SELECT

POWER

SELECT

VOX

SELECT

DUAL

WATCH

ROGER

BEEP

BUTTON

BEEP

I D CODE

SELECT

CALL

SELECT

Press and hold the power on/off button ( ) for at least 2 seconds. You will hear a confirming melody to indicate the unit is on. To turn the unit off, press and hold the button for at least 2 seconds.

Monitor/Display Backlight Button (2)

This button is used to check activity on the current frequency before transmitting. Check activity by pressing the Monitor (M) Button longer

than 2 seconds; the icon will apppear on the display and you will

hear static if frequency is clear. Do not transmit if you hear conversation.

8

Image 8
Contents Model GMRS-7000 Power Setting Refer to Gmrs LicenseModel GMRS-7000 FCC License Required 717 8REFModel GMRS-7000 Display Powering the transceiver BatteriesInstalling the battery pack Charging LED RED Power On/Off 15 Button Monitor/Display Backlight ButtonUp Channel/Volume Button Push To Talk PTT ButtonDown Channel/Volume Button Mode ButtonGrms Operation Emergency EMG Call Button ButtonChannel Selection Ctcss Mode Sub-Channel Selection Transmit Power Selection ModeVOX Selection Mode Dual Watch ModeRoger Beep Tone Key ToneCall Ringer Selection Mode Caller Identification ID SelectEmergency and Assistance Channel Mode Channel Scan OperationWeather Band Operation Channel Selection Auto Key Lock Selection ModeOut of Range Indication Weather Alert Mode Battery AlertPage Troubleshooting Problem Possible cause CorrectionTechnical Specifications Weather Channel Frequencies Channel Freq. MHzContinuous Tone Coded Squelch System Tone Frequencies in Hz Freq. HzDAY Limited Warranty 128-6294