Audiovox FRS122-2 manual Mode Button

Page 10

Up Channel/Volume Button (10)

In the standby mode, pressing this button will increment the listening volume. When in function edit mode this button will be used to adjust the unit’s settings.

Down Channel/Volume Button (11)

In the standby mode, pressing this button will decrement the listening volume. When in function edit mode this button will be used to adjust the unit’s settings.

MODE Button (12)

This button is used to select various feature settings in the FRS modes.

External Speaker (SPK)/ Microphone (MIC)/CHG Jack (6)

This jack accepts both the optional Audiovox headset/microphone connector and the supplied wall charging adapter. For additional optional equipment and accessories for the FRS122-2, visit the Audiovox web site at www.audiovox.com.

Scan Button (13)

With the unit in standby mode, press the Power On/Off Button momentarily to enable or disable the scan function; SCAN will appear on the display.

10

128-6675

10 of 24

Image 10
Contents Model FRS122-2 Safety Information Model FRS122-2 Model FRS122-2DISPLAY Powering the transceiver Equipment and Accessories SuppliedOptional Accessories BatteriesInstalling the batteries MIC/CHG SP Jack Adapter Power Plug On or ControlsMonitor/Display Backlight Button Mode Button Operating Modes and Features Channel SelectionCtcss Mode Sub-Channel Selection Roger Beep Tone Call Ringer Selection Mode VOX Selection ModeButton Beep Key Tone Channel Scan Operation Battery Alert 128-6675 Troubleshooting Problem Possible cause CorrectionTechnical Specifications Main Channel Frequencies Continuous Tone Coded Squelch System Tone Frequencies in Hz Freq. Hz