Audiovox FRS122-2 manual On or, Controls

Page 8

FRS122-2OPERATIONAL MODES

FRS (MODE)

CHANNEL SELECT

CTCSS SELECT

POWER SELECT

ROGER BEEP

(1-14)

(oF, 01-38)

(on or oF)

NOTE: To differentiate between operating modes, look for HI or LO indication below the battery power level indicator when in FRS mode.Refer to the appropriate section of this manual for de- tailed operating instructions for each mode. Channels 1 through 14 are shared FRS only,

Controls:

Power On-Off/SCAN Button (13)

Press and hold the PWR on/off button for at least 2 seconds. You will hear a confirming melody to indicate the unit is on. To turn the unit off, press and hold the button for at least 2 seconds.

Adjusting the Volume (11, 10)

With the unit powered on, press the Up Channel/Volume button ( ) to increase volume and the Down Channel/Volume button ( ) to decrease

8

128-6675

8 of 24

Image 8
Contents Model FRS122-2 Safety Information Model FRS122-2 Model FRS122-2DISPLAY Equipment and Accessories Supplied Optional AccessoriesPowering the transceiver BatteriesInstalling the batteries MIC/CHG SP Jack Adapter Power Plug On or ControlsMonitor/Display Backlight Button Mode Button Operating Modes and Features Channel SelectionCtcss Mode Sub-Channel Selection Roger Beep Tone Button Beep Key Tone VOX Selection ModeCall Ringer Selection Mode Channel Scan Operation Battery Alert 128-6675 Troubleshooting Problem Possible cause CorrectionTechnical Specifications Main Channel Frequencies Continuous Tone Coded Squelch System Tone Frequencies in Hz Freq. Hz