Audiovox FR-1538 owner manual Function Button, External Microphone/Speaker, Monitor M Button

Page 10

Function Button (5):

In the standby mode, pressing this button briefly will enter the function edit mode. Pressing the button for more than 1.5 seconds will activate or deactivate the KEY LOCK when the unit is in the standby mode. Refer to KEY LOCK function description to activate and deactivate the KEY LOCK.

NOTE: All buttons will be disabled except for the Up ( ) Button (8) or the Down ( ) Button (12) Monitor (M) Button (13) and the PTT Button (14).

Monitor (M) Button (13):

The Monitor Button is used to check the activity on a channel before transmitting. When the Monitor Button is pressed, the LCD panel (15) will be lit with an amber backlight, and both the transmit (red) and the receive (green) LEDs will light. Pressing the Monitor Button during the edit function mode will confirm and entry and return the unit to standby. Pressing the Monitor Button during a VOX tranmission (voice activated transmission) will discontinue the transmission and disable the VOX function for 10 seconds.

External Microphone/Speaker (6):

This jack accepts an Audiovox FRS-BHST headset/microphone for total hands- free operation.

NOTES FOR GOOD COMMUNICATION

1 . The FR-1538 14 channels are shared on a ‘take turns’ basis. This means other groups may be talking on any of the channels. A common code of ethics/courtesy is to switch to another vacant channel and not to attempt to talk over someone who is already using the channel you first selected.

2.The FR-1538 has been designed to maximize performance and improve transmission range in the field. To avoid interference, it is recommended that you do not use the units closer than 5 feet apart.

3.For best transmission results, always keep your mouth about 2-3 inches from the microphone (10) and speak slowly in a normal voice.

10

Image 10
Contents Model FR-1538 Read this Manual Carefully Features Page Model FR-1538 Display Bep Powering the transceiverInstalling the batteries Ro9Wrist Strap and Detachable Belt Clip Installation Charging the FR-1538 Charging Transformer Stand Connector RED LED IndicatorPower On/Off and Enter Button Enter ButtonUp Button Volume Control 8Push To Talk PTT Button Down ButtonExternal Microphone/Speaker Function ButtonMonitor M Button FRS-1538 Operational Modes Call Tones Keypad Beep Coded Tone Control Squelch System Ctcss Code Selection FRS Channel Mode Channel Number SelectionALL FRS Channel Scan Selector Priority Channel Scan Mode VOX ModeVOX Sensitivity Selection VOX Recovery Time Selection Mode Stopwatch ModeSUB-MODE Selection KEY Lock Selection ModeCall Melody Selection Menu KEY Beep Tone Selection Channel Preset SelectionRoger Beep Tone Selection Noaa Alert Mode Noaa Channel MenuPage Receiver Technical Specifications GeneralPower Supply TransmitterFRS Channel Frequencies Channel Freq. MHzCtcss Freq. HzTroubleshooting Problem Possible cause Corrective ActionDAY Limited Warranty