Audiovox owner manual Charging the FR-1538, Power On/Off and Enter Button

Charging the FR-1538:

Insert the charging transformer into a household electrical outlet and connect its power jack to the socket on the rear of the charging stand. Simply placing the unit into the charging stand will begin the charging process. The red LED on the front of the charging transformer serves as a charge indicator. The charging stand will charge two units simultaneously. Approximately 12 – 16 hours are required to fully charge the batteries. Remember to turn your FR-1538 OFF before placing it into the charging stand.

CAUTION: The charging stand in your kit is intended for use with the rechargeable NiMH batteries supplied with the unit. Do not attempt to recharge any other type batteries (Alkaline) with the charging stand.

CHARGING	TRANSFORMER	CHARGING
		TRANSFORMER
STAND	CONNECTOR

RED LED

CHARGING

INDICATOR

Controls:

Power On/Off and Enter ( ) Button (9):

Press and hold this button ( ) momentarily to turn the unit on. A short confirming melody will sound and the unit will perform a brief self-test. To turn the unit off, press and hold the button for a 2 second period. A short tone will sound before the unit shuts off. The word bye bye in large and small script will appear momentarily and then disappear.

Enter Button (9):

This button ( ) is also used to confirm options for operating modes during the function edit mode. During main channel selection, a momentary press of this button will access the CTCSS subcode for selection using the Up and Down buttons.

8