Audiovox GMRS121-2 owner manual Installing the batteries

Installing the batteries:

Battery installation is made more convenient when the carry clip is rotated either left or right to the upside-down position, or is removed completely. Simply rotate the clip in either direction to the vertical position. Be careful not to use excessive force. To remove the clip, press down on the the release tab and pull the clip straight out from the radio body. Next, press down with the thumb at the embossed arrow, slide the battery cover down and lift it away from the compartment. Insert three AAA batteries (alternate positive ends (+) toward the top of the transceiver, starting left-to-right).

CLIP RELEASE

TAB

CARRY

CLIP

BATTERY

COVER

POSITIVE

TERMINALS

COVER

+ + ARROW

POSITIVE

TERMINAL

+

1.Using thumb, press down on battery cover at arrow and slide cover down.

2.Then lift cover at bottom to open. Remove cover.

3.Insert three AAA batteries (positive (+) end toward the top begining at left side and alternating positive terminals as shown).

7

128-7005

7 of 20