Troubleshooting

Problem	Possible cause	Correction
No transmission	Weak batteries	Replace batteries
while pressing	Incorrect battery polarity	Install the batteries using
the PTT Button		the directions for correct
		battery installation.

Weak or no	Weak batteries	Replace batteries
signal received	Channel	Adjust the transceiver’s
	not set the same	settings to match those
	as target transceiver	settings of the target
		transceiver
	Volume level too low	Increase volume level
	PTT Button inadvertently	Release PTT Button
	depressed
	Excessive radio interference	Change to a different
	on a particular channel	channel
	Obstruction of radio signal	Avoid operating in or near
		large buildings or vehicles
Unit beeps, but	Batteries extremely	Replace batteries
will not function	discharged
when turned on
Reception of	Interference from	Turn the devices off or move
unwanted	electronic devices such	farther away from them.
signals	as computers or TVs

15 of 20

Problem