Room/Baby Monitor
This feature allows you to monitor sounds in another room. Place a handset (or the base) in the room you wish to monitor; it will function as a microphone. Another handset (or the base) can be set to function as a remote speaker, allowing you to monitor sounds in the room.
) Press the MENU soft key and enter the Room Monitor menu. Press the OK soft key. TO WHICH UNIT? appears.
2) Select the handset or base you want to monitor by using [
] or . [
].
3) Press the OK soft key. MONITORING appears on the handset or the base, and you hear sounds in the room where the handset or base is installed.
4)To turn off the Room Monitor, press the END soft key or [
] on either handset or return the handset to the cradle. (or press the END soft key on the base.)
If you want to prevent other handsets or the base from monitoring this station, press the MENU soft key on the handset or base. Select the HANDSET SETUP menu or the BASE SETUP menu, and then the ROOM MONITOR submenu. Select OFF and press the OK soft key.
Note:
•This feature only works when both handsets are within range of the base.
•If the party is out of range, the operation will be canceled.
•While a handset and the base are in Room/Baby Monitoring, they cannot be used to make or receive calls; however, other handsets can still make and receive calls normally.
To which unit?
Handset #2
Handset #3
BACK DELETE OK
Monitoring 
｣ ｣ Handset #2
LINE1 END LINE2
54