Inuse Line Setup (Base only)
The Inuse Line Setup feature is only used in instances where you have multiple phones where users may pick up an extension while someone else is on the phone. Only in very rare instances where your phone system is not detecting that an extension phone is picked up will you ever need to change this feature. In most all situations, this feature will never need to be used or modified from the factory default setting of
You should only change this option when instructed to by customer service and when you are experiencing one of the following issues:
Issue | Problem | Resolution |
When using an extension phone, | Your phone should detect when an- | Set the Inuse Line Setup to “TYPE- |
“Line in Use” will not appear in the | other extension phone is used. | B” or contact Uniden’s customer ser- |
original handset display. |
| vice hotline. See back cover page |
|
| for contact information. |
You place a caller on hold. You pick | Your phone system is not detecting | Contact Uniden’s customer service |
up an extension handset and finish | that the line was picked up and re- | hotline. See back cover page for |
your conversation. You hang up the | leased. | contact information. |
call from your extension handset, |
|
|
but the original station where you |
|
|
placed the caller on hold does not |
|
|
release the line and therefore, thinks |
|
|
you still have a party on hold. |
|
|
Note: Do not set your Inuse Line Setup to OFF unless instructed to by a Uniden Customer Service Representative. If you set the Inuse Line Setup to OFF, your phone cannot detect the status of an extension phone while in use and will not operate correctly.
56