
Room/Baby Monitor
note
This feature only works when the handset(s) is within the range of the base.
This feature allows you to monitor sounds in another room. Place the base or a handset in the room you wish to monitor; it will function as a microphone. A second handset can be set to function as a remote speaker, allowing you to monitor sounds in the room.
Using Room/Baby Monitor
Monitor using handset or base unit
1) | Press the MENU soft key and select |
|
| Room Monitor menu. |
|
2) | Select the handset or base you want |
|
| to monitor by using volume up/ |
|
| down. |
|
3) | Press the OK soft key. | /QPKVQTKPI |
| Monitoring appears, and you hear sounds in the room | |
| 㨭㨭*CPFUGV | |
| where the handset or the base is installed. |
|
4) | To turn off the Room Monitor, press the END soft key, | '0& |
|
or end.
If you want to prevent other handsets or the base from monitoring this handset, press the MENU soft key. Select the Handset Setup menu, and then the Room Monitor submenu. Select Off and press the OK soft key.
[ 1 9 ] G E T T I N G S T A R T E D | w w w . u n i d e n . c o m |