Talk mode
From the base
1)During talk mode, press cid to review Caller ID message.
From the handset
1)During talk mode, press the MENU soft key. Use volume up/down to select Caller ID, then press the OK soft key.
2)Select the Caller ID message you want to dial (see "Viewing the Caller ID List" on page 49).
3)When the Caller ID number is located, press the DIAL soft key and the number will be dialed.
Storing Caller ID messages in the Phonebook
Messages shown in the Caller ID list can be stored in the phonebook. The phone number and name of the party on the Caller ID list can be stored in memory.
1)When the phone is in standby mode, select the Caller ID message to be stored. Then press the STORE soft key on the base or the EDIT soft key on the handset. From the handset, then select Store into PB? , and then press the OK soft key. Store/Edit Name appears. If the Caller ID message is already stored in memory, you will hear a beep and This data is already stored!! appears. The number will not be stored.
2)To complete the setting, follow the steps
note
•If the Caller ID message was received as a private/unknown number, or the message does not have the number, you cannot store the message in the Phonebook. If it was received as private/ unknown name, the message will be stored as <No Name>.
•If all 100 memory locations are full, the Caller ID message will be erased from Caller ID list when you store it in the phonebook.
C A L L E R I D
w w w . u n i d e n . c o m | C A L L E R I D [ 5 2 ] |