Uniden DCT5285 manual Choose the dialing mode

Page 17

3)Set the base on a desk or tabletop, and place the handset in the base unit as shown.

4)Make sure the charge LED illuminates. If the LED does

not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.

• Use only the supplied AD-830 AC adapter. Do not use any other AC adapter.

• Connect the AC adapter to a continuous power supply.

• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

•While charging, all handset keys will be disabled.

•After installing the batteries in the handset, charge your handset at least 17-20 hours before plugging into the phone line.

5)Once the batteries are fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet.

If your telephone outlet isn't modular

 

type, contact your telephone company

 

for assistance.

Modular

D. Choose the dialing mode

Most phone systems use tone dialing, which sends DTMF tones through the phone lines. However some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the dial mode. To set the dial mode, see “Setting the Dial Mode” on page 30.

•If you are not sure of your dialing system, set the unit to tone dialing. Make a trial call. If the call connects, leave the setting as is, otherwise set the unit to pulse dialing.

• If your phone system requires pulse dialing and you need to send DTMF tones in certain situations during a call, you may “switch-over” to tone dialing. (Refer to “Tone Dialing Switch-over” on page 34.)

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

GETTING STARTED

G E T T I N G S TA R T E D [ 15 ]

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page Page W. u n i d e n . c o m Contents Welcome Features E L C O M E / F E AT U R E S R E N C E G U I D E Controls and Functions DCT5285-2 only Icon Status Description Display and IconsTerminology About Soft Key FunctionN 1 N d s e t L k 3 4 8 918 to Read this First13 to Checking the Package Contents Do the following steps Setting up the PhoneChoose the best location Battery use time per charge Install the AA batteries into the handsetLow battery alert W B a t t e r yConnect the base unit Cleaning the battery charging contactsCharging contacts with a dry cloth before Returning the handset to the base to chargeChoose the dialing mode Standard wall plate mounting Mounting the Base Unit on a WallDirect wall plate mounting DirectLink soft key DCT5285 Flow ChartFrom the standby mode From the Talk mode Handset Setup DirectLink ModeAbout the Menu Summary of the Main Menu and SubmenuAutoTalk Answering SetupSystem Reset Global SetupN 1 Setting up the MenuEntering the Menu Handset Setup DirectLink ModeUsing the DirectLink Mode Setting a Ringer VolumeSelecting a Ringer Tone Distinctive Ringer SetupSetting the AutoTalk Setting the Banner Setting the Anykey AnswerAdjusting the LCD Contrast Selecting a LanguageSetting a PIN Code Answering System SetupSetting the Ring Time Setting the Record TimeSetting the Language of your Answering System Setting the Message Alert On or OffSetting the Call Screen Setting the Answer ModeSetting Day and Time Global SetupSetting Cidcw Setting the Area CodeSetting the Dial Mode System ResetReplacing the Base Setting De-register the HandsetFrom the Handset From the Base Making and Receiving CallsPlacing a Call on Hold Redialing from Standby ModeRedialing a Call L d , t o t r a n s f e r N d s e tRinger Mute temporarily Redialing from Talk ModeRedialing from the Base Deleting a Redial RecordMute Microphone Tone Dialing Switch-overL k L u m e + With the handsetTraveling Out-of-Range When speaking on the handsetClarity Booster Way ConferencingWhen speaking on the base Intercom/Call Transfer FeatureFlash and Call Waiting New Message LEDPresstalk/flash or speaker PhonebookO r e / E d i t N o 0 7 3 0 3 4 5 O r e / E d i t N a m e M o v i e sS t i n c t i v e R i n g N o S e l e c t n I c k e r E e d D i a l S e l e c t n D 1 E m p t ySteps for Entering Names and Special Characters If you make a mistake while entering a name O n e b o o k Viewing the PhonebookA r c h O r e S T O R E A r c hFrom Standby Mode Making Calls Using the PhonebookFrom Talk Mode Speed DialingEditing the Stored Data O n e b o o k A r c h a Z O r e S T O R EMemory Dialing base only Chain DialingStoring Phone Numbers Making Calls with Memory DialingCaller ID You must subscribe to Caller ID service to use this featureN e I t h DateViewing the Caller ID List Deleting all Caller ID names/numbers Deleting Information from the Caller ID ListDeleting a Caller ID message Long Distance calls and Area Code Setting/Cancellation Using the Caller ID Message ListCalling a party from the Caller ID list Storing Caller ID messages in the PhonebookCall Waiting Deluxe Features Integrated Answering Device FeaturesSetting your outgoing message Greeting Setting up your Answering SystemTurning the Answering System On/Off Pre-recorded messageDeleting an outgoing message Setting the base ringer volumeChoosing between the two outgoing messages Using the menu mode Adjusting the speaker volume levelSetting a PIN code Setting the TimeSelecting the message record time Setting the ring timeTurning the message alert tone Off by pressing any key Announce only featureSetting the message alert Screening a call Setting the call screenSelecting the language Repeating a message Using your Answering SystemPlaying your messages Deleting a message Skipping a messageRecording a conversation Voice memoFrom the handset From the baseRemote Operation Remote access away from homeRemote access with the handset Playing incoming messages Expanding Your Phone Connecting the ChargerRegister the Handset Using the DirectLink ModeTo enter the DirectLink mode e See N 1 2 0 0 a N d s e t R e c t L i n k D e DirectLink callD i r e c t L i n k p r e s s 1 R e c t L i n k O m H a n d s e t #From the base to a handset IntercomFrom handset to handset or to the base L d , t o A n s f e r Call Transfer FeatureReplacing the Base Headset Installation Installing the BeltclipChanging the Digital Security Code To attach the beltclipPower Failure MaintenanceBattery replacement and handling AC Adapter Information Supplied Battery InformationGeneral Information Symptom Suggestion TroubleshootingMake sure the base unit is plugged Case Action Liquid DamageHandset BaseE C a U T I O N S & WA R R a N T Y R E C a U T I O N S & WA R R a N T Y Terminal Equipment Radio Equipment Answering system IndexRemote Operation Card Remote access away from homeTask Please do not Return this Product to the Place of Purchase At Uniden, we’ll take care of you

DCT5285 specifications

The Uniden DCT5285 is a versatile cordless phone that combines modern technology with user-friendly features, making it a great choice for both home and office use. This model is renowned for its reliability, sound quality, and innovative functionalities that cater to the needs of today's telecommunication standards.

One of the main features of the Uniden DCT5285 is its long-range capability. Thanks to its advanced digital technology, the phone can maintain a clear and stable connection even at a considerable distance from the base station. This is especially useful in larger homes or offices where mobility is essential.

The DCT5285 is equipped with a large, easy-to-read LCD display that provides essential information at a glance. Users can navigate through the phone's various functions with ease, including features like caller ID, call waiting, and call history. The visibility of the display is further enhanced by its backlit feature, allowing the phone to be used comfortably in low-light conditions.

An impressive feature of the Uniden DCT5285 is its advanced noise reduction technology. This technology minimizes background noise, ensuring that conversations are crystal clear. With the ability to filter out ambient sounds, users can enjoy uninterrupted conversations whether they are in a busy household or a bustling office environment.

The DCT5285 also supports multiple handsets, allowing users to expand their phone system easily. It can accommodate up to 12 handsets, making it a scalable solution for large families or professional settings. Each handset can be registered effortlessly to the main base, providing flexibility and convenience.

Another key characteristic of the Uniden DCT5285 is its built-in answering machine. This feature allows users to manage their calls seamlessly, providing the ability to record messages and play them back at their convenience. The answering machine can also be accessed remotely, enabling users to check messages when they are away from home.

The phone's ergonomic design ensures that it fits comfortably in the hand, and its lightweight structure makes it easy to carry around. Furthermore, the DCT5285 features an eco-mode that reduces power consumption, making it an environmentally friendly choice without compromising performance.

In summary, the Uniden DCT5285 stands out for its excellent sound quality, extensive range, user-friendly interface, and versatility. With its integrated answering machine, noise reduction technology, and the ability to add multiple handsets, it meets the demands of any modern communication setup while maintaining ease of use.
Top Page Image Contents