Uniden DCT5285 manual Register the Handset, Using the DirectLink Mode

Page 67

Register the Handset

If you purchase an extra handset, you need to register the handset before use. Only one handset can be registered at a time.

The handset ID for the supplied handset(s) was assigned at the factory, which has #1 (#1 and #2 for DCT5285-2) in the display. When you register additional handsets to the base, the handset ID will be assigned.

1)Before registering the extra handset, charge the phone’s battery for 10 minutes.

2)Place the extra handset in the main base unit to begin registration.

3)While the handset is registering, “Handset Registering” will appear in the LCD. When “Registration Complete” is displayed, the handset has been registered to the base. If “Registration Failed” appears, please try these steps again.

4)Place the handset back in the charging cradle and fully charge the phone’s battery for 17 to 20 hours.

Using the DirectLink Mode

To use this feature, you must enter the two handsets into the DirectLink mode first.

To enter the DirectLink mode e See page 24

•During DirectLink Mode, batteries use time when fully charged is as follows:

-Up to 7 hours continuous use.

-Up to 24 hours in the standby mode.

•Placing the handset in the cradle causes the handset to exit the DirectLink mode.

An extra handset can be registered when the base is in the standby mode.

EXPANDING YOUR

PHONE

E X PA N D I N G Y O U R P H O N E [ 65 ]

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Page Page W. u n i d e n . c o m Contents Welcome Features E L C O M E / F E AT U R E S R E N C E G U I D E Controls and Functions DCT5285-2 only Icon Status Description Display and IconsL k 3 4 8 9 About Soft Key FunctionTerminology N 1 N d s e t13 to Read this First18 to Checking the Package Contents Choose the best location Setting up the PhoneDo the following steps W B a t t e r y Install the AA batteries into the handsetBattery use time per charge Low battery alertReturning the handset to the base to charge Cleaning the battery charging contactsConnect the base unit Charging contacts with a dry cloth beforeChoose the dialing mode Standard wall plate mounting Mounting the Base Unit on a WallDirect wall plate mounting From the standby mode DCT5285 Flow ChartDirectLink soft key From the Talk mode Summary of the Main Menu and Submenu DirectLink ModeHandset Setup About the MenuAutoTalk Answering SetupSystem Reset Global SetupEntering the Menu Setting up the MenuN 1 Setting a Ringer Volume DirectLink ModeHandset Setup Using the DirectLink ModeSetting the AutoTalk Distinctive Ringer SetupSelecting a Ringer Tone Selecting a Language Setting the Anykey AnswerSetting the Banner Adjusting the LCD ContrastSetting the Record Time Answering System SetupSetting a PIN Code Setting the Ring TimeSetting the Answer Mode Setting the Message Alert On or OffSetting the Language of your Answering System Setting the Call ScreenSetting the Area Code Global SetupSetting Day and Time Setting CidcwDe-register the Handset System ResetSetting the Dial Mode Replacing the Base SettingFrom the Handset From the Base Making and Receiving CallsL d , t o t r a n s f e r N d s e t Redialing from Standby ModePlacing a Call on Hold Redialing a CallDeleting a Redial Record Redialing from Talk ModeRinger Mute temporarily Redialing from the BaseWith the handset Tone Dialing Switch-overMute Microphone L k L u m e +Way Conferencing When speaking on the handsetTraveling Out-of-Range Clarity BoosterNew Message LED Intercom/Call Transfer FeatureWhen speaking on the base Flash and Call WaitingPresstalk/flash or speaker PhonebookE e d D i a l S e l e c t n D 1 E m p t y O r e / E d i t N a m e M o v i e sO r e / E d i t N o 0 7 3 0 3 4 5 S t i n c t i v e R i n g N o S e l e c t n I c k e rSteps for Entering Names and Special Characters If you make a mistake while entering a name A r c h Viewing the PhonebookO n e b o o k A r c h O r e S T O R ESpeed Dialing Making Calls Using the PhonebookFrom Standby Mode From Talk ModeEditing the Stored Data O n e b o o k A r c h a Z O r e S T O R EMaking Calls with Memory Dialing Chain DialingMemory Dialing base only Storing Phone NumbersDate You must subscribe to Caller ID service to use this featureCaller ID N e I t hViewing the Caller ID List Deleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Storing Caller ID messages in the Phonebook Using the Caller ID Message ListLong Distance calls and Area Code Setting/Cancellation Calling a party from the Caller ID listCall Waiting Deluxe Features Integrated Answering Device FeaturesPre-recorded message Setting up your Answering SystemSetting your outgoing message Greeting Turning the Answering System On/OffChoosing between the two outgoing messages Setting the base ringer volumeDeleting an outgoing message Using the menu mode Adjusting the speaker volume levelSetting a PIN code Setting the TimeSelecting the message record time Setting the ring timeSetting the message alert Announce only featureTurning the message alert tone Off by pressing any key Selecting the language Setting the call screenScreening a call Playing your messages Using your Answering SystemRepeating a message Deleting a message Skipping a messageFrom the base Voice memoRecording a conversation From the handsetRemote Operation Remote access away from homeRemote access with the handset Playing incoming messages Expanding Your Phone Connecting the ChargerTo enter the DirectLink mode e See Using the DirectLink ModeRegister the Handset R e c t L i n k O m H a n d s e t # DirectLink callN 1 2 0 0 a N d s e t R e c t L i n k D e D i r e c t L i n k p r e s s 1From handset to handset or to the base IntercomFrom the base to a handset Replacing the Base Call Transfer FeatureL d , t o A n s f e r To attach the beltclip Installing the BeltclipHeadset Installation Changing the Digital Security CodeBattery replacement and handling MaintenancePower Failure General Information Supplied Battery InformationAC Adapter Information Symptom Suggestion TroubleshootingMake sure the base unit is plugged Base Liquid DamageCase Action HandsetE C a U T I O N S & WA R R a N T Y R E C a U T I O N S & WA R R a N T Y Terminal Equipment Radio Equipment Answering system IndexRemote Operation Card Remote access away from homeTask Please do not Return this Product to the Place of Purchase At Uniden, we’ll take care of you

DCT5285 specifications

The Uniden DCT5285 is a versatile cordless phone that combines modern technology with user-friendly features, making it a great choice for both home and office use. This model is renowned for its reliability, sound quality, and innovative functionalities that cater to the needs of today's telecommunication standards.

One of the main features of the Uniden DCT5285 is its long-range capability. Thanks to its advanced digital technology, the phone can maintain a clear and stable connection even at a considerable distance from the base station. This is especially useful in larger homes or offices where mobility is essential.

The DCT5285 is equipped with a large, easy-to-read LCD display that provides essential information at a glance. Users can navigate through the phone's various functions with ease, including features like caller ID, call waiting, and call history. The visibility of the display is further enhanced by its backlit feature, allowing the phone to be used comfortably in low-light conditions.

An impressive feature of the Uniden DCT5285 is its advanced noise reduction technology. This technology minimizes background noise, ensuring that conversations are crystal clear. With the ability to filter out ambient sounds, users can enjoy uninterrupted conversations whether they are in a busy household or a bustling office environment.

The DCT5285 also supports multiple handsets, allowing users to expand their phone system easily. It can accommodate up to 12 handsets, making it a scalable solution for large families or professional settings. Each handset can be registered effortlessly to the main base, providing flexibility and convenience.

Another key characteristic of the Uniden DCT5285 is its built-in answering machine. This feature allows users to manage their calls seamlessly, providing the ability to record messages and play them back at their convenience. The answering machine can also be accessed remotely, enabling users to check messages when they are away from home.

The phone's ergonomic design ensures that it fits comfortably in the hand, and its lightweight structure makes it easy to carry around. Furthermore, the DCT5285 features an eco-mode that reduces power consumption, making it an environmentally friendly choice without compromising performance.

In summary, the Uniden DCT5285 stands out for its excellent sound quality, extensive range, user-friendly interface, and versatility. With its integrated answering machine, noise reduction technology, and the ability to add multiple handsets, it meets the demands of any modern communication setup while maintaining ease of use.
Top Page Image Contents