Uniden DCT5285 manual Liquid Damage, Case Action, Handset, Base

Page 76

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.

Case

 

Action

If the handset or base is exposed

Wipe off the liquid and use as normal.

to moisture or liquid, but only

 

 

affects the exterior plastic housing.

 

 

If moisture or liquid has entered

Handset:

the plastic-housing (i.e. liquid

1)

Remove the battery cover and leave it off for ventilation.

can be heard in the phone or

2)

Remove the batteries by disconnecting.

liquid has entered the handset

3)

Leave the battery cover off and the batteries disconnected for at least 3 days.

battery compartment or vent

4)

Once completely dry, reinstall the batteries and the battery cover.

openings on the base).

5)

Recharge the handset’s batteries for 20 hours in the base unit before using

 

 

the phone.

 

Base:

 

1)

Disconnect the AC adapter from the base unit, cutting off electrical power.

 

2)

Disconnect the telephone cord from the base unit.

 

3)

Let dry for at least 3 days.

 

IMPORTANT: You must unplug the telephone line while recharging the batteries

 

to avoid charge interruption.

 

CAUTION:

 

DO NOT use a microwave oven to speed up the drying process. This will cause

 

permanent damage to the handset, base and the microwave oven.

 

After following these steps, if your cordless telephone does not work, please send to:

 

Uniden America Corporation

 

Parts and Service Division

 

4700 Amon Carter Blvd.

 

Ft. Worth TX76155

 

1-800-554-3988. Monday through Friday

 

8 a.m. to 5 p.m. CST

[ 74 ] T R O U B L E S H O O T I N G

Page 75 Page 77
Image 76
Page 75 Page 77
Contents Page Page W. u n i d e n . c o m Contents Welcome Features E L C O M E / F E AT U R E S R E N C E G U I D E Controls and Functions DCT5285-2 only Display and Icons Icon Status DescriptionAbout Soft Key Function TerminologyN 1 N d s e t L k 3 4 8 913 to Read this First18 to Checking the Package Contents Choose the best location Setting up the PhoneDo the following steps Install the AA batteries into the handset Battery use time per chargeLow battery alert W B a t t e r yCleaning the battery charging contacts Connect the base unitCharging contacts with a dry cloth before Returning the handset to the base to chargeChoose the dialing mode Mounting the Base Unit on a Wall Standard wall plate mountingDirect wall plate mounting From the standby mode DCT5285 Flow ChartDirectLink soft key From the Talk mode DirectLink Mode Handset SetupAbout the Menu Summary of the Main Menu and SubmenuAnswering Setup AutoTalkGlobal Setup System ResetEntering the Menu Setting up the MenuN 1 DirectLink Mode Handset SetupUsing the DirectLink Mode Setting a Ringer VolumeSetting the AutoTalk Distinctive Ringer SetupSelecting a Ringer Tone Setting the Anykey Answer Setting the BannerAdjusting the LCD Contrast Selecting a LanguageAnswering System Setup Setting a PIN CodeSetting the Ring Time Setting the Record TimeSetting the Message Alert On or Off Setting the Language of your Answering SystemSetting the Call Screen Setting the Answer ModeGlobal Setup Setting Day and TimeSetting Cidcw Setting the Area CodeSystem Reset Setting the Dial ModeReplacing the Base Setting De-register the HandsetMaking and Receiving Calls From the Handset From the BaseRedialing from Standby Mode Placing a Call on HoldRedialing a Call L d , t o t r a n s f e r N d s e tRedialing from Talk Mode Ringer Mute temporarilyRedialing from the Base Deleting a Redial RecordTone Dialing Switch-over Mute MicrophoneL k L u m e + With the handsetWhen speaking on the handset Traveling Out-of-RangeClarity Booster Way ConferencingIntercom/Call Transfer Feature When speaking on the baseFlash and Call Waiting New Message LEDPhonebook Presstalk/flash or speakerO r e / E d i t N a m e M o v i e s O r e / E d i t N o 0 7 3 0 3 4 5S t i n c t i v e R i n g N o S e l e c t n I c k e r E e d D i a l S e l e c t n D 1 E m p t ySteps for Entering Names and Special Characters If you make a mistake while entering a name Viewing the Phonebook O n e b o o kA r c h O r e S T O R E A r c hMaking Calls Using the Phonebook From Standby ModeFrom Talk Mode Speed DialingO n e b o o k A r c h a Z O r e S T O R E Editing the Stored DataChain Dialing Memory Dialing base onlyStoring Phone Numbers Making Calls with Memory DialingYou must subscribe to Caller ID service to use this feature Caller IDN e I t h DateViewing the Caller ID List Deleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Using the Caller ID Message List Long Distance calls and Area Code Setting/CancellationCalling a party from the Caller ID list Storing Caller ID messages in the PhonebookCall Waiting Deluxe Features Features Integrated Answering DeviceSetting up your Answering System Setting your outgoing message GreetingTurning the Answering System On/Off Pre-recorded messageChoosing between the two outgoing messages Setting the base ringer volumeDeleting an outgoing message Adjusting the speaker volume level Using the menu modeSetting the Time Setting a PIN codeSetting the ring time Selecting the message record timeSetting the message alert Announce only featureTurning the message alert tone Off by pressing any key Selecting the language Setting the call screenScreening a call Playing your messages Using your Answering SystemRepeating a message Skipping a message Deleting a messageVoice memo Recording a conversationFrom the handset From the baseRemote access away from home Remote OperationRemote access with the handset Playing incoming messages Connecting the Charger Expanding Your PhoneTo enter the DirectLink mode e See Using the DirectLink ModeRegister the Handset DirectLink call N 1 2 0 0 a N d s e t R e c t L i n k D eD i r e c t L i n k p r e s s 1 R e c t L i n k O m H a n d s e t #From handset to handset or to the base IntercomFrom the base to a handset Replacing the Base Call Transfer FeatureL d , t o A n s f e r Installing the Beltclip Headset InstallationChanging the Digital Security Code To attach the beltclipBattery replacement and handling MaintenancePower Failure General Information Supplied Battery InformationAC Adapter Information Troubleshooting Symptom SuggestionMake sure the base unit is plugged Liquid Damage Case ActionHandset BaseE C a U T I O N S & WA R R a N T Y R E C a U T I O N S & WA R R a N T Y Terminal Equipment Radio Equipment Index Answering systemRemote access away from home Remote Operation CardTask At Uniden, we’ll take care of you Please do not Return this Product to the Place of Purchase

DCT5285 specifications

The Uniden DCT5285 is a versatile cordless phone that combines modern technology with user-friendly features, making it a great choice for both home and office use. This model is renowned for its reliability, sound quality, and innovative functionalities that cater to the needs of today's telecommunication standards.

One of the main features of the Uniden DCT5285 is its long-range capability. Thanks to its advanced digital technology, the phone can maintain a clear and stable connection even at a considerable distance from the base station. This is especially useful in larger homes or offices where mobility is essential.

The DCT5285 is equipped with a large, easy-to-read LCD display that provides essential information at a glance. Users can navigate through the phone's various functions with ease, including features like caller ID, call waiting, and call history. The visibility of the display is further enhanced by its backlit feature, allowing the phone to be used comfortably in low-light conditions.

An impressive feature of the Uniden DCT5285 is its advanced noise reduction technology. This technology minimizes background noise, ensuring that conversations are crystal clear. With the ability to filter out ambient sounds, users can enjoy uninterrupted conversations whether they are in a busy household or a bustling office environment.

The DCT5285 also supports multiple handsets, allowing users to expand their phone system easily. It can accommodate up to 12 handsets, making it a scalable solution for large families or professional settings. Each handset can be registered effortlessly to the main base, providing flexibility and convenience.

Another key characteristic of the Uniden DCT5285 is its built-in answering machine. This feature allows users to manage their calls seamlessly, providing the ability to record messages and play them back at their convenience. The answering machine can also be accessed remotely, enabling users to check messages when they are away from home.

The phone's ergonomic design ensures that it fits comfortably in the hand, and its lightweight structure makes it easy to carry around. Furthermore, the DCT5285 features an eco-mode that reduces power consumption, making it an environmentally friendly choice without compromising performance.

In summary, the Uniden DCT5285 stands out for its excellent sound quality, extensive range, user-friendly interface, and versatility. With its integrated answering machine, noise reduction technology, and the ability to add multiple handsets, it meets the demands of any modern communication setup while maintaining ease of use.
Top Page Image Contents