Uniden DECT 4096, DECT4096 manual Installing Your Phone, Set Up the Base, Attach the stand

Page 3

Installing Your Phone

Set Up the Base

Attach the stand

Before you attach the stand, you have to decide if you want the phone to rest on a desk or hang on a wall.

For desktop use

1.Turn the stand so the word Desk is right- side up (it will be on the right).

2.Insert the tabs into the notches marked Desk at the top of the base.

WALL

DESK

WALL

DESK

3.Press in on the latch and slip it into the notch.

For wall mount use

1.Turn the stand so the word Wall is right- side up (it will be on the right).

DESK

WALL

DESK WALL

2. Insert the tabs into the notches marked Wall at the bottom of the base.

3. Press in on the latch and slip it into the notch.

To remove the stand

Press in on the latches and slide them out of the notch.

Connect the corded handset

Use the coiled cord to connect the corded handset to the connector on the left side of the base.

Image 3

Contents Phone Number DECT4096 Series Users GuideWhats in the box? You will also findWhats in the manual? Important Safety InstructionsConnect the corded handset Installing Your PhoneSet Up the Base Attach the standConnect the power and telephone cords Place the phone on the wallFor desktop use For wall mount use Check Test ConnectionTest Line TrySet Up the Accessory Handsets Install the batteryChanging from Tone to Pulse Dialing Test the connection Connect the chargerKey name What it does Icon Getting to Know Your PhoneParts of the Base Base keys and how they workDuring text entry move the cursor to the right Increase the speaker volumeStandby start playing messages Standby or during a call open the Caller ID listStandby turn the Do Not Disturb feature on or off see Parts of the HandsetStandby open the redial list Handset keys and how they work Base Icon Reading the DisplaysOn the base On the handsetAnswering system status icons Base Icon Handset Icon What it meansIcon What it means On the base Using the Soft KeysSoft keys with the phone in standby Soft keys in the main menuCommon soft key descriptions Entering Text on Your Phone Handset Setup Using the MenusMenu option Use it to Display. Enter any name up to 10 characters BannerSpecial Feature Menus Using Your Phone Working with Two LinesAssigning a primary line Conferencing two lines together Medium, or High Using the SpeakerphoneChanging the Volume When On the base On a handsetUsing the Caller ID and Redial Lists Using the listsDialing from the CID or redial list Caller ID and redial menu options Using Seven-Digit DialingUsing Call Waiting Using an Optional HeadsetFinding a Lost Handset Using the Phonebook Creating a new entry Setting Up Your PhonebookPhonebook Menu Options Editing an existing entryCopy All One accessory handset to use this multi-station feature Chain DialingDelete Erase this entry Using Multi-station Features Using Multi-Station Conference CallingExpanding Your Phone Using Privacy Mode Using Call TransferFrom the base From a cordless handset Using the Intercom Using the Alarm Feature Using Special FeaturesUsing Your Phone During a Power Failure Using Do Not DisturbTuesday Using Voice Message Notification When an alarm ringsResetting the voice message indicator Recording your outgoing message Using the Answering SystemSetting Up Your Answering System Switch between the pre-recorded greeting and your greetingTo your messages, press any key on the base Ans. Setup menu optionsDelete your greeting Your new messages. To mute the alert without listeningGetting Your Messages Accessing your system from a handset remote operationHow to operate your answering system Icon Command Name Handset key Base keyFrom the base From a handset Screening Your CallsRemember to make a note of your new security code Using the System While Youre Away from HomeProgramming a security code Dialing in to your systemIf… Try… Solving ProblemsAnnounce Only see Says UnavailableWeak or Hard To Hear Audio Static is Installing a line filter or DSL filterNoise or Static onO The lLine Here are some hints for whenDo you have the base the handset is registered to? Yes Resetting and Registering Handsets# until the System Reset Registering a handsetHandling Liquid Damage Registration FailedHandset Base 120V AC, 60 Hz Important InformationBase Charger PS-0034 PS-0035Compliance Information FCC Part 15.105b FCC Part 15 informationTerminal equipment Radio equipment RF exposure information574,727 581,598 606,598 650,790 660,269 663,981 671,248