Uniden DECT4096, DECT 4096 manual Resetting and Registering Handsets, Registering a handset

Page 46

static on telephones. A DSL filter or telephone line filter usually solves this problem. The technician who installed your DSL service might have left some filters for you; if not, call your DSL provider or look in any electronics store.

Plug the DSL filter into the telephone wall jack and plug your phone’s base into the filter. Make a test call to make sure the noise is gone.

Telephone cord

Telephone wall jack

DSL filter

Resetting and Registering Handsets

If you are having trouble with a cordless handset or if you want to replace one, you need to clear the registration information from the base and the handset:

Do you have the base the handset is registered to?

 

Yes

 

No

1.

Press and hold End and # until the

1.

Press and hold End and

 

System Reset menu appears (about 5

 

# until the System Reset

 

seconds).

 

menu appears (about 5

2.

Select Deregister HS. The display lists

 

seconds).

 

all registered handsets.

2.

Select Base Unavailable.

3.

Select the handset you want to reset.

3.

When the handset asks

4.

When the handset asks you to confirm,

 

you to confirm, select Yes.

 

select Yes. (It may ask you twice, just

 

(It may ask you twice, just

 

to be sure.) The handset clears its

 

to be sure.) The handset

 

information from the base and deletes

 

deletes its own link without

 

it own link to the base.

 

contacting the base.

 

 

 

 

When you reset a handset (or if you buy a new one), that handset displays a Handset Not Registered message. If you see this message on a handset, you need to register it to a base before you can use it.

Registering a handset

1.On the base, open the menu and select Register Handset. The display should say Handset Registering.

2.On the handset you want to register, press and hold # until the handset display says Handset Registering (about 2 seconds).

44

Image 46
Contents You will also find DECT4096 Series Users GuideWhats in the box? Phone NumberImportant Safety Instructions Whats in the manual?Attach the stand Installing Your PhoneSet Up the Base Connect the corded handsetPlace the phone on the wall Connect the power and telephone cordsFor desktop use For wall mount use Try Test ConnectionTest Line CheckInstall the battery Set Up the Accessory HandsetsChanging from Tone to Pulse Dialing Connect the charger Test the connectionBase keys and how they work Getting to Know Your PhoneParts of the Base Key name What it does IconStandby or during a call open the Caller ID list Increase the speaker volumeStandby start playing messages During text entry move the cursor to the rightParts of the Handset Standby turn the Do Not Disturb feature on or off seeStandby open the redial list Handset keys and how they work On the handset Reading the DisplaysOn the base Base IconBase Icon Handset Icon What it means Answering system status iconsIcon What it means Soft keys in the main menu Using the Soft KeysSoft keys with the phone in standby On the baseCommon soft key descriptions Entering Text on Your Phone Using the Menus Handset SetupMenu option Use it to Banner Display. Enter any name up to 10 charactersSpecial Feature Menus Working with Two Lines Using Your PhoneAssigning a primary line Conferencing two lines together When On the base On a handset Using the SpeakerphoneChanging the Volume Medium, or HighUsing the lists Using the Caller ID and Redial ListsDialing from the CID or redial list Using Seven-Digit Dialing Caller ID and redial menu optionsUsing an Optional Headset Using Call WaitingFinding a Lost Handset Using the Phonebook Setting Up Your Phonebook Creating a new entryEditing an existing entry Phonebook Menu OptionsCopy All Chain Dialing One accessory handset to use this multi-station featureDelete Erase this entry Using Multi-Station Conference Calling Using Multi-station FeaturesExpanding Your Phone Using Call Transfer Using Privacy ModeFrom the base From a cordless handset Using the Intercom Using Do Not Disturb Using Special FeaturesUsing Your Phone During a Power Failure Using the Alarm FeatureTuesday When an alarm rings Using Voice Message NotificationResetting the voice message indicator Switch between the pre-recorded greeting and your greeting Using the Answering SystemSetting Up Your Answering System Recording your outgoing messageYour new messages. To mute the alert without listening Ans. Setup menu optionsDelete your greeting To your messages, press any key on the baseIcon Command Name Handset key Base key Accessing your system from a handset remote operationHow to operate your answering system Getting Your MessagesScreening Your Calls From the base From a handsetDialing in to your system Using the System While Youre Away from HomeProgramming a security code Remember to make a note of your new security codeSolving Problems If… Try…Says Unavailable Announce Only seeWeak or Hard To Hear Audio Here are some hints for when Installing a line filter or DSL filterNoise or Static onO The lLine Static isRegistering a handset Resetting and Registering Handsets# until the System Reset Do you have the base the handset is registered to? YesRegistration Failed Handling Liquid DamageHandset Base PS-0034 PS-0035 Important InformationBase Charger 120V AC, 60 HzCompliance Information FCC Part 15 information FCC Part 15.105bRF exposure information Terminal equipment Radio equipment574,727 581,598 606,598 650,790 660,269 663,981 671,248