Uniden DECT 4096, DECT4096 Series manual Connect the charger, Test the connection

Page 7

4. Place the cover over the battery compartment and slide it up into place.

Connect the charger

1. Connect a charger AC adapter to each charger's AC IN 8V jack and set the plug into the notch as shown. (These adapters might already be connected.)

2. Plug the other end of the adapter into a standard 120V AC power outlet.

3. Place each handset in a charger with the display facing forward. The charge light should turn on.

If...

Try...

the charge

- reseating the handset.

light doesn't

- checking the AC adapter connection.

turn on

- seeing if the outlet is controlled by a wall

 

switch.

Charge all handsets completely (about 15 hours) before using them.

Test the connection

Pick up each handset and press Talk. You should hear a dial tone, and the display should say Talk. (Press End to hang up.)

If you can't get a dial tone or the handset display says Unavailable, try moving the handset closer to the base or resetting it (see page 44).



Page 6 Page 8
Image 7
Page 6 Page 8
Contents Phone Number DECT4096 Series Users GuideWhats in the box? You will also findWhats in the manual? Important Safety InstructionsConnect the corded handset Installing Your PhoneSet Up the Base Attach the standPlace the phone on the wall Connect the power and telephone cordsFor desktop use For wall mount use Check Test ConnectionTest Line TryInstall the battery Set Up the Accessory HandsetsChanging from Tone to Pulse Dialing Test the connection Connect the chargerKey name What it does Icon Getting to Know Your PhoneParts of the Base Base keys and how they workDuring text entry move the cursor to the right Increase the speaker volumeStandby start playing messages Standby or during a call open the Caller ID listParts of the Handset Standby turn the Do Not Disturb feature on or off seeStandby open the redial list Handset keys and how they work Base Icon Reading the DisplaysOn the base On the handsetBase Icon Handset Icon What it means Answering system status iconsIcon What it means On the base Using the Soft KeysSoft keys with the phone in standby Soft keys in the main menuCommon soft key descriptions Entering Text on Your Phone Handset Setup Using the MenusMenu option Use it to Display. Enter any name up to 10 characters BannerSpecial Feature Menus Working with Two Lines Using Your PhoneAssigning a primary line Conferencing two lines together Medium, or High Using the SpeakerphoneChanging the Volume When On the base On a handsetUsing the lists Using the Caller ID and Redial ListsDialing from the CID or redial list Caller ID and redial menu options Using Seven-Digit DialingUsing an Optional Headset Using Call WaitingFinding a Lost Handset Using the Phonebook Creating a new entry Setting Up Your PhonebookEditing an existing entry Phonebook Menu OptionsCopy All Chain Dialing One accessory handset to use this multi-station featureDelete Erase this entry Using Multi-Station Conference Calling Using Multi-station FeaturesExpanding Your Phone Using Call Transfer Using Privacy ModeFrom the base From a cordless handset Using the Intercom Using the Alarm Feature Using Special FeaturesUsing Your Phone During a Power Failure Using Do Not DisturbTuesday When an alarm rings Using Voice Message NotificationResetting the voice message indicator Recording your outgoing message Using the Answering SystemSetting Up Your Answering System Switch between the pre-recorded greeting and your greetingTo your messages, press any key on the base Ans. Setup menu optionsDelete your greeting Your new messages. To mute the alert without listeningGetting Your Messages Accessing your system from a handset remote operationHow to operate your answering system Icon Command Name Handset key Base keyFrom the base From a handset Screening Your CallsRemember to make a note of your new security code Using the System While Youre Away from HomeProgramming a security code Dialing in to your systemIf… Try… Solving ProblemsAnnounce Only see Says UnavailableWeak or Hard To Hear Audio Static is Installing a line filter or DSL filterNoise or Static onO The lLine Here are some hints for whenDo you have the base the handset is registered to? Yes Resetting and Registering Handsets# until the System Reset Registering a handsetRegistration Failed Handling Liquid DamageHandset Base 120V AC, 60 Hz Important InformationBase Charger PS-0034 PS-0035Compliance Information FCC Part 15.105b FCC Part 15 informationTerminal equipment Radio equipment RF exposure information574,727 581,598 606,598 650,790 660,269 663,981 671,248
Top Page Image Contents