Shift Keying (FSK) notification. Contact your voice mail provider for information.
When you have new messages, the display shows a message icon. To listen to your new (and old) messages, press Message/mute and select Voice Mail.
When you select Voice Mail, you will be prompted to enter a
Voice Mail Access number if you have not yet set one up (see p. 8). If you have already set one up, your phone will dial it.
After you listen to your messages, the message icon turns off. If it doesn’t, you can reset it: With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes.
Using the Answering System
Answering System Options (Ans. Setup)
You can set or change the answering system options from any handset. Just open the menu and select Ans. Setup.
Select this option... | To... | |
Security Code | Enter a | |
answering system from any | ||
| p. 21). | |
| Set the number of rings (2, 4, or 6) before the system | |
Ring Time | answers. Toll Saver makes the system answer after | |
2 rings if you have new messages or after 4 rings if | ||
| ||
| you don't. | |
| Set the amount of time (1 or 4 minutes) callers | |
Record Time | have to leave a message. Choose Announce Only if | |
you don't want the system to let callers to leave a | ||
| ||
| message. | |
| Have the system beep every 15 seconds when you | |
Message Alert | have a new message. The alert stops after you listen | |
to all your new messages or if you press any key on | ||
| ||
| the base. | |
Ans. Language | Change the language of the system's voice | |
prompts. | ||
|