CAUTION! Risk of explosion | a regular indoor (120V AC) | |
if battery is replaced by an | power outlet. Connect any | |
incorrect type! Dispose of used | chargers the same way. | |
batteries according to the | 6. Place a handset in the base with | |
instructions. Do not open or | ||
the display facing forward. If | ||
mutilate the battery. Disconnect | ||
the display doesn’t light up, | ||
the battery before shipping this | ||
product. | reseat the handset or connect | |
For more details, see the | the base to a different outlet. | |
For 2 or more handsets, place | ||
Important Information section. | ||
each handset in a charger. | ||
| ||
Getting Started | Charge all handsets | |
completely (about 15 hours) | ||
Installing Your Phone | before using. | |
Charge the Battery | Connect the Telephone Cord | |
1. Unpack all handsets, | Use the telephone cord to connect | |
battery | the TEL LINE jack on the base to a | |
packs, and | standard telephone wall jack. | |
battery | Test the Connection | |
covers. If | ||
1. Pick up the handset and press | ||
you need | ||
Talk. The handset sounds a dial | ||
to remove | ||
tone, and the display shows | ||
a cover, press in on the notch | ||
Talk. | ||
and slide the cover down and | ||
– If you don't hear a dial tone or | ||
off. | ||
the display says Check Tel Line, | ||
2. Line up the battery connector | ||
check the connection between | ||
with the jack inside the | the base and the phone jack. | |
handset; the connector only fits | 2. Make a quick test call. (Press | |
one way. | End to hang up.) | |
3. Push the connector in until | – If you keep hearing a dial tone, | |
it clicks into place; tug gently | change to pulse dialing. | |
on the wires to make sure the | – If there’s a lot of noise, check | |
battery is securely connected. | for interference (see p. 22). | |
4. Replace the battery cover and | 3. Test all handsets the same way. | |
slide it into place. | If you can't get a dial tone, | |
5. Use an AC adapter to connect | move the handset closer to the | |
base. | ||
the power jack on the base to | ||
|
English -