Uniden D1780-2 manual Using the Answering System, Answering System Options Answering Setup

After you listen to your messages, the message icon turns off. If it doesn’t, you can reset it: With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes.

Using the Answering System

Answering System Options (Answering Setup)

You can set or change the answering system options from any handset. Just open the menu and select Answering Setup. Select one of the following:

Security Code	Enter a 2-digit PIN so you can access your answering
	system from any touch-tone phone (see p. 15).
	Set the number of rings (2, 4, or 6) before the system
Ring Time	answers. Toll Saver makes the system answer after 2 rings
	if you have new messages or after 4 rings if you don't.
	Set the amount of time (1 or 4 minutes) callers have to
Record Time	leave a message. Choose Announce Only if you don't
	want the system to let callers to leave a message.
Message Alert	Have the system beep every 15 seconds when you have
	a new message. The alert stops after you listen to all
	your new messages or if you press any key on the base.
Ans. Language	Change the language of the system's voice prompts.
Call Screen	Turn on the call screen feature so you can hear callers as
	they leave messages on the base speaker (see p. 15).
Ans. On/off	Turn your answering system on or off.
Record Greeting	Record an outgoing message or greeting (see below).
Greeting Options	Switch greetings or delete your greeting (see below).

Personalizing the Greeting

Your personal outgoing message or greeting can be from 2 to 30 seconds long. If you don’t record a greeting, the system uses a pre-recorded greeting: Hello, no one is available to take your call. Please leave a message after the tone.

14 -English