Uniden D1780-2 Getting Started, Installing Your Phone, Charge the Battery, Test the Connection

Page 3

Getting Started

Installing Your Phone

Charge the Battery

1. Unpack all handsets, battery packs, and battery covers. If

you need to remove a

cover, press in on the notch and slide the cover down and off.

2.Line up the battery connector with the jack inside the handset; the connector only fits one way.

3.Push the connector in until it clicks into place; tug gently on the wires to make sure the battery is securely connected.

4.Replace the battery cover and slide it into place.

5.Use an AC adapter to connect the power jack on the base to a regular indoor (120V AC) power outlet. Connect any chargers the same way.

6.Place a handset in the base with the display facing forward. If the display doesn’t light up, reseat the handset or connect the base to a different outlet. For 2 or more handsets, place each handset in a charger.

##Charge all handsets completely (about 15 hours) before using.

Connect the Telephone Cord

Use the telephone cord to connect the TEL LINE jack on the base to a standard telephone wall jack.

Test the Connection

1.Pick up the handset and press Talk. The handset sounds a dial tone, and the display shows Talk.

––If you don't hear a dial tone or the display says Check Tel Line, check the connection between the base and the phone jack.

2.Make a quick test call. (Press End to hang up.)

––If you keep hearing a dial tone, change to pulse dialing.

––If there’s a lot of noise, check for interference (see p. 17).

3.Test all handsets the same way. If you can't get a dial tone, move the handset closer to the base.

Changing to Pulse Dialing

Your phone uses tone dialing by default. If your phone company uses pulse dialing, you need to change your phone’s dial mode.

1.On a handset, press Menu/select and choose Global Setup.

2.Select Dial Mode then Pulse. You’ll hear a confirmation tone.

To send DTMF tones during a call (e.g., for an automated response system), press * to temporarily switch to tone dialing. When you hang up, the phone automatically returns to pulse dialing.

English - 3

Image 3
Contents If You Contact Uniden’s Phone Number D1780 Series Users GuideWhats in the box? You will also findAnswering System Options Important Safety InstructionsUsing the System While What’s in the manual?Test the Connection Installing Your PhoneCharge the Battery Getting StartedKey icon What it does XxSwitch a normal call to the speakerphone and backGetting to Know Your Phone Parts of the HandsetWhat it means Reading the DisplayIcon What it means XxWhile playing a message restart the message Icon What it means Handset is using ECO power save modeEnter 1 capital or 2 lower case letters see p Parts of the BaseUsing the Handset Menu Press Using Your PhoneUsing Earpiece Speakerphone Entering Text on Your PhoneFinding a Lost Handset Changing the Volume To change When PressUsing the Caller ID and Redial Lists Assigning a Speed Dial NumberTo… Press Using the PhonebookUsing Call Waiting Caller ID list Redial listDeleting All the Phonebook Entries Using Special FeaturesSilent Mode Adding Phonebook EntriesCall Transfer Press Multihandset FeaturesPrivacy Mode Conference CallingChain Dialing Voice Message NotificationHandset to Handset Intercom Using the Answering System Answering System Options Answering SetupPersonalizing the Greeting Follow these steps Accessing the Answering SystemAnswering Setup, then Record Greeting Answering Setup, then Greeting OptionsScreening Your Calls Using the System While Youre Away from HomeGetting Your Messages From the base From a handsetProgramming a Security Code Solving ProblemsGeneral problems Possible solutions Important InformationCaller ID problems Possible solutions System keeps recording when I answer on an extension Installing a Line Filter or DSL FilterLiquid Damage AC adapter Adapter and Battery InformationRechargeable Battery Warning Battery pack with normal useFCC Part 15 Information FCC RF Exposure Information Industry Canada I.C. NoticeYear Limited Warranty English